Dell S300, S100 manual Boot to it

Page 16

Table 2-2. Platform Requirements — PERC S100 Controller or PERC S300 Controller

Component Requirements

Microsoft Windows Server 2008 Web Edition (x64)

Microsoft Windows Server 2008 Web Edition (x86)

Microsoft Windows Small Business Server 2008

Microsoft Windows Small Business Server 2008 SP2

Microsoft Windows Small Business Server 2003 R2 SP2 (x86 or x64)

Microsoft Windows Small Business Server 2011

Microsoft Windows Web Server 2008 R2

Microsoft Windows Web Server 2008 R2 SP1

Microsoft Windows Server 2003 SP2 (x86 or x64)

Microsoft Windows Server 2003 R2 SP2, 32-bit or 64-bit, Standard and Enterprise Edition

Microsoft Windows Server 2003 R2 SP2 32-bit Web Edition

Microsoft Windows Server 2008 SP2, 32-bit or 64-bit, Standard and Enterprise Edition

 

NOTE: Microsoft Windows Server 2003 SP1 is not supported.

 

NOTE: Microsoft Windows Server 2003 R2 is not supported.

 

NOTE: PERC S100 controllers and PERC S300 controller are not supported

 

with Windows Hyper-V.

 

 

Supported

• PERC S100 adapter: supports Dell-supported SATA-based tape devices

devices

and SATA optical disk devices.

 

NOTE: The PERC S100 controller supports system boot to a tape using a

 

Dell RD1000 tape device. Select Continue while in CTRL-R for RD1000 to

 

remain first in the boot order. The RD1000 option goes to end of the boot

 

order listing if <Ctrl><Alt><Del> is selected and you would not be able to

 

boot to it.

PERC S300 adapter: does not support tape devices or SATA optical disk devices.

16

Overview

Image 16
Contents User’s Guide February Contents Installing the Perc S300 Adapter Complete the Hardware InstallationInstalling the Microsoft Windows Drivers Physical Disk-Related ErrorsRAID Technology Understanding Disk Arrays Industry Canada Notice Canada OnlyContents Page Safety General Safety When Working Inside Your SystemProtecting Against Electrostatic Discharge Page Overview IntroductionOverview Supported Platforms Requirements Physical disksOverview Boot to it About RAID Summary of RAID LevelsDisk Striping RAID TerminologyDisk Mirroring Spanned RAID Levels Parity DataExample of Distributed Parity RAID General Features FeaturesDescription Description Allows hot-swapping Physical disks, in the same virtual disk Disks That supports hot-swappingBackplane with hot-swap capability Features Virtual disk Migration during an OCESpecifications RAID Before You Begin Hardware InstallationGeneral Considerations Installing the Perc S300 Adapter Installing a Perc S300 Adapter Connecting the Cables Complete the Hardware Installation Connect Physical Disks to the Perc S300 AdapterHardware Installation Installing the Microsoft Windows Drivers Installing the DriversDownloading the Controller Driver Media Operating System And Device Driver Media Pre-Installation Requirements for the Controller DriversTo Use Sata Controller to either ATA Mode or Ahci Pre-Installation Procedures For The Controller Drivers Steps DVD, and so on, perform the following For Microsoft Windows Server 2008 and Windows Server 2008 R2 For Microsoft Windows Server For Microsoft Windows Server 2008 and Windows Server 2008 R2 Installing the Drivers Installing the Drivers RAID Configuration Management Perc Virtual Disk Management Utility Operations DescriptionAccessing the Perc Virtual Disk Management Utility Perc Virtual Disk Management Text Colors Description Initializing Physical Disks Creating Virtual Disks Before You BeginRAID Configuration and Management Deleting Virtual Disks RAID Configuration and Management Swapping Two Virtual Disks Create a Global Hot Spare Managing Global Hot SparesDelete a Global Hot Spare Viewing Physical Disk Details Viewing Virtual Disk DetailsRescanning Disks Controller Options Description How to OperateController Options Continuing to Boot Pause if DegradedRAID Configuration and Management System Startup Problems TroubleshootingRAID Mode to ATA Mode Boot Mode, Boot Sequence Bios Bios Screen Corrective Action Lost This warning message appears when multiple virtual disks are This warning message appears when From virtual disk creation Virtual Disk-Related Errors On the virtual disk A Virtual Disk is in a Failed StateRedundant virtual disk 12. Cannot Create a Global Hot Spare Select View Virtual Disk Details Physical Disk-Related Errors 14. a Dedicated Hot Spare FailsTroubleshooting Controller Specifications Appendix aRead, Write, and Cache Policy S300 adapterController Tasks Physical Disk TasksTable A-3. Physical Disk Tasks Physical Disk Task Name Perc S300 adapterVirtual Disk Tasks Supported RAID LevelsTable A-4. Virtual Disk Tasks Virtual Disk Task Name AdapterVirtual Disk Specifications Appendix B RAID Technology Understanding Disk Arrays and Virtual DisksUnderstanding RAID Levels Appendix B Disk States Virtual and Physical Disks Table B-2. Physical Disk States DefinitionFailure States Table B-3. Virtual Disk States State DefinitionTable B-5. Minimum and Maximum Physical Disk Configurations Creating Virtual Disks Future ExpansionUnderstanding Physical Disks Physical Disk StatesDedicated Hot Spares Rescanning Physical Disks for Changes in StateGlobal Hot Spares Appendix C Regulatory NoticesFCC Notice U.S. Only FCC, Class aFCC, Class B Industry Canada Notice Canada Only CE Notice European UnionIndustry Canada, Class a Industry Canada, Class BAppendix C CE Mark Notice Appendix D Contacting DellAppendix D Index Index Index 100 101 102 Glossary 103104 105 106 107 Acronym for nanoseconds, one billionth of a second108 109 110
Related manuals
Manual 81 pages 24.45 Kb Manual 81 pages 29.77 Kb