Dell S300, S100 manual Pre-Installation Procedures For The Controller Drivers Steps

Page 40

Table 5-2. Pre-Installation Procedures For The Controller Drivers (continued)

Procedure	Steps

4 Create a bootable	See "Creating Virtual Disks" on page 51.
virtual disk

5 Check controller options and the boot list priority

aAt the PERC S100 Virtual Disk Management utility or PERC S300 Virtual Disk Management utility, use the arrow keys to select Controller Options. Press <Enter>. Make sure that Toggle INT13 Boot Support is ON. Press <Esc> to exit.

bAt the Virtual Disks field, make sure the bootable virtual disk created in Procedure 4, is the first virtual disk listed.

If the bootable virtual disk is not the first virtual disk listed, see "Swapping Two Virtual Disks" on page 55.

NOTE: If Non-Raid virtual disks are used (and appear in the Virtual Disks list), the Swap Two Virtual Disks option is enabled only if the system contains an initialized physical disk.

c Select Continue to Boot and press <Enter>.

NOTE: If the next Procedure (6) is not applicable, continue with one of the following procedures:

•"Installing the Controller Drivers During the Operating System Installation: For Systems with a PERC S100 Adapter" on page 42

•"Installing the Controller Drivers During the Operating System Installation: For Systems with a PERC S300 Adapter" on page 44

40

Installing the Drivers

Image 40

Contents User’s Guide February Contents Installing the Perc S300 Adapter Complete the Hardware InstallationInstalling the Microsoft Windows Drivers Physical Disk-Related ErrorsRAID Technology Understanding Disk Arrays Industry Canada Notice Canada OnlyContents Page Safety General Safety When Working Inside Your SystemProtecting Against Electrostatic Discharge Page Overview IntroductionOverview Supported Platforms Requirements Physical disksOverview Boot to it About RAID Summary of RAID LevelsDisk Striping RAID TerminologyDisk Mirroring Spanned RAID Levels Parity DataExample of Distributed Parity RAID General Features FeaturesDescription Description Allows hot-swapping Physical disks, in the same virtual disk Disks That supports hot-swappingBackplane with hot-swap capability Features Virtual disk Migration during an OCESpecifications RAID Before You Begin Hardware InstallationGeneral Considerations Installing the Perc S300 Adapter Installing a Perc S300 Adapter Connecting the Cables Complete the Hardware Installation Connect Physical Disks to the Perc S300 AdapterHardware Installation Installing the Microsoft Windows Drivers Installing the DriversDownloading the Controller Driver Media Operating System And Device Driver Media Pre-Installation Requirements for the Controller DriversTo Use Sata Controller to either ATA Mode or Ahci Pre-Installation Procedures For The Controller Drivers Steps DVD, and so on, perform the following For Microsoft Windows Server 2008 and Windows Server 2008 R2 For Microsoft Windows Server For Microsoft Windows Server 2008 and Windows Server 2008 R2 Installing the Drivers Installing the Drivers RAID Configuration Management Perc Virtual Disk Management Utility Operations DescriptionAccessing the Perc Virtual Disk Management Utility Perc Virtual Disk Management Text Colors Description Initializing Physical Disks Creating Virtual Disks Before You BeginRAID Configuration and Management Deleting Virtual Disks RAID Configuration and Management Swapping Two Virtual Disks Create a Global Hot Spare Managing Global Hot SparesDelete a Global Hot Spare Viewing Physical Disk Details Viewing Virtual Disk DetailsRescanning Disks Controller Options Description How to OperateController Options Continuing to Boot Pause if DegradedRAID Configuration and Management System Startup Problems TroubleshootingRAID Mode to ATA Mode Boot Mode, Boot Sequence Bios Bios Screen Corrective Action Lost This warning message appears when multiple virtual disks are This warning message appears when From virtual disk creation Virtual Disk-Related Errors On the virtual disk A Virtual Disk is in a Failed StateRedundant virtual disk 12. Cannot Create a Global Hot Spare Select View Virtual Disk Details Physical Disk-Related Errors 14. a Dedicated Hot Spare FailsTroubleshooting Controller Specifications Appendix aRead, Write, and Cache Policy S300 adapterController Tasks Physical Disk TasksTable A-3. Physical Disk Tasks Physical Disk Task Name Perc S300 adapterVirtual Disk Tasks Supported RAID LevelsTable A-4. Virtual Disk Tasks Virtual Disk Task Name AdapterVirtual Disk Specifications Appendix B RAID Technology Understanding Disk Arrays and Virtual DisksUnderstanding RAID Levels Appendix B Disk States Virtual and Physical Disks Table B-2. Physical Disk States DefinitionFailure States Table B-3. Virtual Disk States State DefinitionTable B-5. Minimum and Maximum Physical Disk Configurations Creating Virtual Disks Future ExpansionUnderstanding Physical Disks Physical Disk StatesDedicated Hot Spares Rescanning Physical Disks for Changes in StateGlobal Hot Spares Appendix C Regulatory NoticesFCC Notice U.S. Only FCC, Class aFCC, Class B Industry Canada Notice Canada Only CE Notice European UnionIndustry Canada, Class a Industry Canada, Class BAppendix C CE Mark Notice Appendix D Contacting DellAppendix D Index Index Index 100 101 102 Glossary 103104 105 106 107 Acronym for nanoseconds, one billionth of a second108 109 110

Related manuals

Manual 81 pages 24.45 Kb

Manual 81 pages 29.77 Kb