Dell S100, S300 manual This warning message appears when multiple virtual disks are

Table 7-5. Warning Messages: Dell Inc. PERC S100 or S300 Adapter BIOS (continued)

Warning Message	Corrective Action
WARNING: Found	This warning message appears when multiple virtual disks are
virtual disks	in Degraded and Failed state and Pause if Degraded or
that are	Pause if Failed are set to ON at the PERC Virtual Disk
Degraded and	Management utility.
Failed	The following message appears after the warning is displayed:
	--- Press <Enter> to continue, or <Ctrl><R>
	to enter setup ---
	Press <Enter> to allow the operating system to continue its
	boot, or press <Ctrl><R> to enter into the PERC Virtual Disk
	Management utility to investigate the cause of the Degraded
	and Failed virtual disks.
	NOTE: A boot virtual disk that is in a Failed state prevents the
	operating system from booting.
	To investigate the cause, check for the following:
	• Whether the virtual disk is in Degraded status because one of
	the physical disks of a RAID 1 or RAID 5 virtual disk has
	failed, or one of the physical disks of a RAID 10 virtual disk
	has failed.
	Press <Ctrl><R> and verify if the physical disks are offline
	or missing. Remove and replace a failed physical disk. A
	second physical disk failure could cause a Degraded virtual
	disk to change to Failed status.
	• Whether the virtual disk is in a Failed status because one or
	more of the physical disks have failed.
	Press <Ctrl><R> and verify if the physical disks are offline
	or missing. Remove and replace the failed physical disk or
	disks.

Troubleshooting

67