Emotiva manual DMC-1 Front Panel Features, Power Button, Important Please note the DMC-1

Page 14

DMC-1 Front Panel Features

8

7

6

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9

 

1

2

 

 

 

 

 

10

3

4

1 Power Button

 

4

Rotate this manual control clockwise to

 

This turns the DMC-1 on or off. It is a non-

 

 

increase the volume. The dB level will

 

latching momentary button. If you press

 

 

 

 

 

appear in the front panel display. When

 

Z II first, it can turn on Zone 2 (even if the

 

 

 

 

 

turning on a new source, make sure the

 

Main Zone is off).

 

 

 

 

 

 

 

level is low, such as -80 dB and increase

 

 

 

 

 

 

IMPORTANT – Please note the DMC-1

 

 

it slowly. The dB display becomes less

 

 

 

negative as the volume increases.The

 

requires initialization after the power cord

 

 

DMC-1 volume control is velocity sensitive.

 

is plugged into the AC receptacle. Push and

 

 

If turned slowly, the volume will change

 

hold the power button for approx. 5 seconds.

 

 

in small increments. If rotated quickly,

 

The unit will power up after this small delay.

 

 

level change will be made in larger

 

The second push of the power button will

 

 

increments.

 

 

 

turn the unit off and after this the unit will

 

 

 

 

 

 

 

 

 

turn on and off in a normal fashion.

 

 

Note: When the DMC-1 is turned on, it has a

 

 

 

 

 

2

 

 

 

 

deliberately slow and smooth volume ramp

IR Receiver Window

 

 

 

from silence, up to the level that was set when

 

This window should be clean and free from

 

 

the unit was last turned off. It can also be

 

obstruction for the remote control to work

 

 

programmed to come up to a preset volume

 

correctly.

 

 

 

you have selected, rather than the previous

3

Processor Display

 

 

 

volume.The knob does not turn when volume

display shows

 

 

is operated from the DMC-1 remote.

 

This soothing blue

 

 

 

 

 

 

 

 

which input is selected, the tuner frequency, volume level, and other useful information.

Page 14

Image 14
Contents USER’S Guide Page Table of Contents Audio Outputs Audio InputsFM Antenna AM Antenna Digital Inputs Digital OutputParty Main Zone MenuVideo Menu Subwoofer ModeZone 2 Menu Tuner Operation Recording Zone 2 OperationTechnical Specifications Licensing and Trademark Disclosures Safety Precautions Page NEC National Electrical Code Standards Thank You for your DMC-1 Purchase Dear Home Entertainment EnthusiastDMC-1 Unpacking the DMC-1Recording the Serial Number Serial Number Place of Purchase Date of PurchaseFeatures of the DMC-1 A/V Controller Important Please note the DMC-1 DMC-1 Front Panel FeaturesPower Button Is operated from the DMC-1 remoteDigi Dolby DigitalDTS Additional Front Panel Features Panel DIM ButtonComponent Video DMC-1 Rear Panel LayoutAudio/Video Inputs Audio/Video Outputs Channels10 8-CH Analog Input Stereo Outputs FM AntennaGround Screw Side-Axis OutputsDigital Inputs IEEE-1394 Firewire PortIEC Line Cord Socket Connection Tips for Superior Sound Installation and ConnectionsAC Power Considerations Page What is Component Video? What is Composite Video?What is S-Video? Connection Tips for Video Quality and FlexibilityZone Specific Turn-On Triggers Video Up ConversionVideo Output to the Main Screen and OSD Here are two connection options OptionConnection Diagrams Page Connecting to the TV or Projector using Component Video Connecting a VCR Analog Audio and Composite Video Connecting a CD Player Analog Audio Connecting a Cassette Tape or DAT Deck Connecting the 8-Channel Analog Inputs Connecting the AM and FM Antennas Connecting an Amplifier Main Zone Connecting an Amplifier Zone Connecting an Amplifier Zone Overview of the DMC-1 Remote Button LayoutDevice Buttons LCD DisplayButton and Display Light ButtonQuick Start Instructions for DMC-1 Setup Quick Start Setup InstructionsAdding Batteries to the Remote Control · Speaker Size · Speaker Calibration · Speaker PositionA cohesive sound field Available and it is highly recommendedDistance menu Feature Number Turning on Zone Operation of the DMC-1 using the RemoteTurning on the Main Zone Programming and Configuring Your Components PRO Learn FAV Macro Punch Recal Erase Edit Light CloneLearn FAV Setup Erase Recal Recall Clone OSD Activation On-Screen Display OSD FunctionsVideo Connections DVD Digital 48KTrim Menu How to Navigate the OSD MenusOSD Menus UP Arrow Right Arrow Left Arrow Down ArrowModes Menu DTS LFESelected. Also, this input only works in the Main Tone MenuInputs Menu Tuner Preset Menu Saving AM/FM PresetsPower Up Volume Mode Settings MenusPower Up Source Power Up VolumeSIDE-AXIS Speakers Speakers Menu SizeMain Speakers Surround Back Speakers Surround SpeakersCenter Speaker SubwooferSpeaker Position Distance Speakers Menu Calibration Use the OSD to navigate to the Speaker Calibration menuCrossover Adjustment Video Delay OSD Popup Volume, Source, and ModeVideo Default VID2/MON2 OUTSoftware Menu Surround Modes for 2 Channel Source Material Special Features of the Emotiva DMC-1Bass Management Jazz Club Dolby PRO Logic II and Dolby PRO LogicParty DTS Surround Modes for Multi-Channel SourcesSource Direct DTS ES Setting the Presets Tuning Stations ManuallyTuning Stations Directly Tuner OperationRecalling a Preset Station Scanning PresetsRecording Recording to a Tape Player Connections IndicatorsZone 2 Adjust Page Software Upgrades on CD Speaker Placement Tips Tips Before You BeginFront Speakers Center SpeakerSide-Axis Speakers Surround SpeakersSurround Back Speakers Subwoofer LocationPlay a test Tone or low bass music Place the subwoofer Remote Control Codes Audio ComponentsCable Boxes Satellite/DSS Receivers DVD PlayersLaserdisc Players Televisions VCRs Page Troubleshooting Guide No Sound from one or more full range speakersSee pages See page 50Make sure the disc is not dirty or scratched See pages 43Zone 2 does not play digital inputs Hum Noises Favorite Settings Log Video Settings Selection RS-232 Port Rear Main I/R Rear Zone 2 I/R Front Panel I/RDVD SAT VID Tuner Tape Phono PositionTechnical Specifications XLR OutputsLicensing and Trademark Disclosures DTS DisclosureEmotiva Limited WarrantyService Assistance for the DMC-1 Page Franklin, TN

DMC-1 specifications

The Emotiva DMC-1 is an advanced audio control processor designed to elevate your home theater experience to new heights. With a blend of modern technology and a commitment to high-fidelity sound reproduction, the DMC-1 is equipped with features that cater to both audiophiles and casual listeners alike.

One of the standout features of the DMC-1 is its capability to handle 16 channels of audio processing. This allows it to support up to 7.1.8 Dolby Atmos configurations, enabling an immersive sound experience that envelops listeners in their favorite films and music. The DMC-1 also supports DTS:X, providing an additional layer of flexibility for home theater enthusiasts seeking to create a customized audio setup.

At the heart of the DMC-1 is its state-of-the-art DAC (digital-to-analog converter) technology, which ensures that audio signals are converted with pristine accuracy. This includes high-resolution audio formats up to 24-bit/192kHz, allowing users to enjoy their favorite tracks and movies with remarkable clarity and detail.

The DMC-1 also integrates robust room calibration technology, featuring Audyssey MultEQ XT32. This allows the DMC-1 to analyze the acoustics of your room and optimize audio output for the best possible sound experience. This feature is vital for creating balanced audio in spaces that may have irregular dimensions or reflective surfaces.

Another key characteristic of the DMC-1 is its diverse connectivity options. With multiple HDMI inputs and outputs, the processor is well-equipped to handle various sources, from gaming consoles to streaming devices and Blu-ray players. In addition, the DMC-1 supports HDMI 2.0 with HDCP 2.2, providing compatibility with 4K Ultra HD content and HDR formats.

Emotiva's focus on user experience is evident in the DMC-1’s intuitive interface. It includes a full-color LCD screen and customizable on-screen menus, making navigation effortless. Additionally, the DMC-1 comes with a dedicated remote control, as well as integration options for control systems, making it easy to include in any smart home setup.

In conclusion, the Emotiva DMC-1 is a versatile and powerful audio control processor that promises to enhance any home theater system. With its advanced audio processing capabilities, high-quality DAC technology, automated room calibration, extensive connectivity options, and user-friendly interface, the DMC-1 stands out as a top choice for those seeking exceptional audio performance. Whether you're a movie buff, a music lover, or a gaming enthusiast, the DMC-1 delivers a level of sound quality and precision that is sure to impress.