Emotiva DMC-1 manual · Speaker Size, · Speaker Calibration · Speaker Position

Page 40

Safety Precaution - Make sure that all of your equipment remains unplugged from the AC mains until you have made all the connections.

Step 3 - Connect the speakers to your amplifier(s) so you will be able to hear sound.

Step 4 - If you are using a new DVD player or had previously configured it with 2-channel (RCA type) analog audio connections, you may need to configure the output to digital audio. In your DVD player’s AUDIO SETUP MENU, you must set the digital output to BITSTREAM. If this is not set correctly, the DMC-1 cannot decode the digital information for discrete surround sound playback.

Step 5 - The DMC-1 has a bass management system which allows the damaging bass from each full range channel to be redirected to a subwoofer. Larger speakers can typically play the full frequency range, however you may choose to have smaller speakers (such as satellite types) can have the bass redirected to the subwoofer(s). Make a note of which speakers you would like to play the full frequency range (Large) and those which will have the bass redirected (Small). Also make a note of the approximate distance of each speaker from your listening position.

Step 6 - Turn on the DMC-1

Step 7 - Turn on your amplifiers, TV and other source equipment.

Step 8 - Press the remote MAIN button - a few times to make sure you are on the Main Menu in the remote’s display.

Step 9 - Set the remote to operate the DMC-1 by pressing the EMO button.

Step 10 - Turn down the DMC-1 volume and use the remote or front panel input selector to select a video source.

Step 11 - Play the source, and bring up the volume to a low level. Make sure the video can be seen in the TV monitor.

Step 12 - Stop or pause the source.

.The DMC-1 now needs to be setup correctly to suit your speakers and system. The SETTINGS (OSD) menu is used to enter and make three main adjustments:

· Speaker Size

· Speaker Calibration · Speaker Position

This setup needs to be done when you use your system for the first

 

time, or if you change anything such as the amplifiers or speakers, or

 

the speaker position. The calibration is also a good way to check that

 

your system is working correctly. These adjustments are made using

 

the OSD as follows:

Step

Step 13 - Press MENU on the remote to

13

bring up the MAIN Menu of the OSD on

your TV.

 

Step 14 -Use the joystick pad left, right, up and down buttons

 

to navigate through the menus in the next steps.

 

Joystick

Page 40

Image 40
Contents USER’S Guide Page Table of Contents Audio Inputs FM Antenna AM AntennaAudio Outputs Digital Inputs Digital OutputParty Main Zone MenuSubwoofer Mode Zone 2 MenuVideo Menu Tuner Operation Recording Zone 2 OperationTechnical Specifications Licensing and Trademark Disclosures Safety Precautions Page NEC National Electrical Code Standards Thank You for your DMC-1 Purchase Dear Home Entertainment EnthusiastUnpacking the DMC-1 Recording the Serial NumberDMC-1 Serial Number Place of Purchase Date of PurchaseFeatures of the DMC-1 A/V Controller DMC-1 Front Panel Features Power ButtonImportant Please note the DMC-1 Is operated from the DMC-1 remoteDTS Dolby DigitalDigi Additional Front Panel Features Panel DIM ButtonDMC-1 Rear Panel Layout Audio/Video Inputs Audio/Video OutputsComponent Video Channels10 8-CH Analog Input FM Antenna Ground ScrewStereo Outputs Side-Axis OutputsIEC Line Cord Socket IEEE-1394 Firewire PortDigital Inputs AC Power Considerations Installation and ConnectionsConnection Tips for Superior Sound Page What is Composite Video? What is S-Video?What is Component Video? Connection Tips for Video Quality and FlexibilityVideo Output to the Main Screen and OSD Video Up ConversionZone Specific Turn-On Triggers Here are two connection options OptionConnection Diagrams Page Connecting to the TV or Projector using Component Video Connecting a VCR Analog Audio and Composite Video Connecting a CD Player Analog Audio Connecting a Cassette Tape or DAT Deck Connecting the 8-Channel Analog Inputs Connecting the AM and FM Antennas Connecting an Amplifier Main Zone Connecting an Amplifier Zone Connecting an Amplifier Zone Overview of the DMC-1 Remote Button LayoutLCD Display Button and Display LightDevice Buttons ButtonAdding Batteries to the Remote Control Quick Start Setup InstructionsQuick Start Instructions for DMC-1 Setup · Speaker Size · Speaker Calibration · Speaker PositionDistance menu Available and it is highly recommendedA cohesive sound field Feature Number Turning on the Main Zone Operation of the DMC-1 using the RemoteTurning on Zone Programming and Configuring Your Components PRO Learn FAV Macro Punch Recal Erase Edit Light CloneLearn FAV Setup Erase Recal Recall Clone On-Screen Display OSD Functions Video ConnectionsOSD Activation DVD Digital 48KHow to Navigate the OSD Menus OSD MenusTrim Menu UP Arrow Right Arrow Left Arrow Down ArrowModes Menu DTS LFEInputs Menu Tone MenuSelected. Also, this input only works in the Main Tuner Preset Menu Saving AM/FM PresetsSettings Menus Power Up SourcePower Up Volume Mode Power Up VolumeMain Speakers Speakers Menu SizeSIDE-AXIS Speakers Surround Speakers Center SpeakerSurround Back Speakers SubwooferSpeaker Position Distance Speakers Menu Calibration Use the OSD to navigate to the Speaker Calibration menuCrossover Adjustment OSD Popup Volume, Source, and Mode Video DefaultVideo Delay VID2/MON2 OUTSoftware Menu Bass Management Special Features of the Emotiva DMC-1Surround Modes for 2 Channel Source Material Party Dolby PRO Logic II and Dolby PRO LogicJazz Club Source Direct Surround Modes for Multi-Channel SourcesDTS DTS ES Tuning Stations Manually Tuning Stations DirectlySetting the Presets Tuner OperationRecalling a Preset Station Scanning PresetsRecording Recording to a Tape Player Zone 2 Adjust IndicatorsConnections Page Software Upgrades on CD Speaker Placement Tips Tips Before You BeginFront Speakers Center SpeakerSide-Axis Speakers Surround SpeakersSurround Back Speakers Subwoofer LocationPlay a test Tone or low bass music Place the subwoofer Remote Control Codes Audio ComponentsCable Boxes Laserdisc Players DVD PlayersSatellite/DSS Receivers Televisions VCRs Page Troubleshooting Guide No Sound from one or more full range speakersSee pages See page 50Make sure the disc is not dirty or scratched See pages 43Zone 2 does not play digital inputs Hum Noises Favorite Settings Log Video Settings Selection RS-232 Port Rear Main I/R Rear Zone 2 I/R Front Panel I/RDVD SAT VID Tuner Tape Phono PositionTechnical Specifications XLR OutputsLicensing and Trademark Disclosures DTS DisclosureService Assistance for the DMC-1 Limited WarrantyEmotiva Page Franklin, TN

DMC-1 specifications

The Emotiva DMC-1 is an advanced audio control processor designed to elevate your home theater experience to new heights. With a blend of modern technology and a commitment to high-fidelity sound reproduction, the DMC-1 is equipped with features that cater to both audiophiles and casual listeners alike.

One of the standout features of the DMC-1 is its capability to handle 16 channels of audio processing. This allows it to support up to 7.1.8 Dolby Atmos configurations, enabling an immersive sound experience that envelops listeners in their favorite films and music. The DMC-1 also supports DTS:X, providing an additional layer of flexibility for home theater enthusiasts seeking to create a customized audio setup.

At the heart of the DMC-1 is its state-of-the-art DAC (digital-to-analog converter) technology, which ensures that audio signals are converted with pristine accuracy. This includes high-resolution audio formats up to 24-bit/192kHz, allowing users to enjoy their favorite tracks and movies with remarkable clarity and detail.

The DMC-1 also integrates robust room calibration technology, featuring Audyssey MultEQ XT32. This allows the DMC-1 to analyze the acoustics of your room and optimize audio output for the best possible sound experience. This feature is vital for creating balanced audio in spaces that may have irregular dimensions or reflective surfaces.

Another key characteristic of the DMC-1 is its diverse connectivity options. With multiple HDMI inputs and outputs, the processor is well-equipped to handle various sources, from gaming consoles to streaming devices and Blu-ray players. In addition, the DMC-1 supports HDMI 2.0 with HDCP 2.2, providing compatibility with 4K Ultra HD content and HDR formats.

Emotiva's focus on user experience is evident in the DMC-1’s intuitive interface. It includes a full-color LCD screen and customizable on-screen menus, making navigation effortless. Additionally, the DMC-1 comes with a dedicated remote control, as well as integration options for control systems, making it easy to include in any smart home setup.

In conclusion, the Emotiva DMC-1 is a versatile and powerful audio control processor that promises to enhance any home theater system. With its advanced audio processing capabilities, high-quality DAC technology, automated room calibration, extensive connectivity options, and user-friendly interface, the DMC-1 stands out as a top choice for those seeking exceptional audio performance. Whether you're a movie buff, a music lover, or a gaming enthusiast, the DMC-1 delivers a level of sound quality and precision that is sure to impress.