Emotiva DMC-1 manual Troubleshooting Guide, No Sound from one or more full range speakers

Page 84

Troubleshooting Guide

The Emotiva DMC-1 is expertly designed and built to provide years of trouble-free performance. Most problems that occur can usually be solved by checking your setup or making sure that the audio and video components connected to the processor are on and fully operational.

The following information will help you deal with common setup problems you may experience during normal use of your unit. If problems persist, contact your Emotiva Dealer for help.

No Sound (from one or more full range speakers)

Speaker cables may have come undone. Turn off your system and check the cables, and tighten the binding posts.

An audio cable may have an internal break.

The volume level is low for the channels concerned. Recheck the calibration procedure (page 59).

The Mute switch is on.

The channel has not been turned on in the Speaker Size Menu (pages 56-57).

The correct surround mode is not selected. (Some DVD discs are stereo only).

Note: In Source Direct mode, only the front left and right speakers are engaged. They must also be set to Large.

No Subwoofer (or poor output)

The subwoofer’s amplifier is off or its controls are set low.

Are all other speakers set to LARGE in the Speaker Size menus?

SUB is not switched on in the Speaker Size Menu (page 57).

Recheck the calibration procedure (page 59).

Adjust the Crossover and check Bass Management (page 60).

See pages 76-77 to find the best location for your subwoofer.

If the bass is weak during Dolby Digital or DTS playback, check the correct audio output is selected in your DVD menu, otherwise it may just play stereo into your DMC-1 and you won’t get the true LFE signal to the subwoofer.

Poor AM Reception

Often one of the main complaints about poor AM reception is that the same AM station can be heard at different frequencies. Check to see is BOTH wires of the AM loop antenna are connected. A loop antenna is required for AM reception, as it forms part of the front-end tuned circuit.

Poor FM Reception

The antenna may be incorrectly attached.

Station not correctly tuned in, weak or off the air.

You can improve reception by using external antennas. Some cable TV feeds also offer FM reception.

Page 84

Page 83 Page 85
Image 84
Page 83 Page 85
Contents USER’S Guide Page Table of Contents Audio Inputs FM Antenna AM AntennaAudio Outputs Digital Inputs Digital OutputParty Main Zone MenuSubwoofer Mode Zone 2 MenuVideo Menu Tuner Operation Recording Zone 2 OperationTechnical Specifications Licensing and Trademark Disclosures Safety Precautions Page NEC National Electrical Code Standards Thank You for your DMC-1 Purchase Dear Home Entertainment EnthusiastUnpacking the DMC-1 Recording the Serial NumberDMC-1 Serial Number Place of Purchase Date of PurchaseFeatures of the DMC-1 A/V Controller DMC-1 Front Panel Features Power ButtonImportant Please note the DMC-1 Is operated from the DMC-1 remoteDolby Digital DTSDigi Additional Front Panel Features Panel DIM ButtonDMC-1 Rear Panel Layout Audio/Video Inputs Audio/Video OutputsComponent Video Channels10 8-CH Analog Input FM Antenna Ground ScrewStereo Outputs Side-Axis OutputsIEEE-1394 Firewire Port IEC Line Cord SocketDigital Inputs Installation and Connections AC Power ConsiderationsConnection Tips for Superior Sound Page What is Composite Video? What is S-Video?What is Component Video? Connection Tips for Video Quality and FlexibilityVideo Up Conversion Video Output to the Main Screen and OSDZone Specific Turn-On Triggers Here are two connection options OptionConnection Diagrams Page Connecting to the TV or Projector using Component Video Connecting a VCR Analog Audio and Composite Video Connecting a CD Player Analog Audio Connecting a Cassette Tape or DAT Deck Connecting the 8-Channel Analog Inputs Connecting the AM and FM Antennas Connecting an Amplifier Main Zone Connecting an Amplifier Zone Connecting an Amplifier Zone Overview of the DMC-1 Remote Button LayoutLCD Display Button and Display LightDevice Buttons ButtonQuick Start Setup Instructions Adding Batteries to the Remote ControlQuick Start Instructions for DMC-1 Setup · Speaker Size · Speaker Calibration · Speaker PositionAvailable and it is highly recommended Distance menuA cohesive sound field Feature Number Operation of the DMC-1 using the Remote Turning on the Main ZoneTurning on Zone Programming and Configuring Your Components PRO Learn FAV Macro Punch Recal Erase Edit Light CloneLearn FAV Setup Erase Recal Recall Clone On-Screen Display OSD Functions Video ConnectionsOSD Activation DVD Digital 48KHow to Navigate the OSD Menus OSD MenusTrim Menu UP Arrow Right Arrow Left Arrow Down ArrowModes Menu DTS LFETone Menu Inputs MenuSelected. Also, this input only works in the Main Tuner Preset Menu Saving AM/FM PresetsSettings Menus Power Up SourcePower Up Volume Mode Power Up VolumeSpeakers Menu Size Main SpeakersSIDE-AXIS Speakers Surround Speakers Center SpeakerSurround Back Speakers SubwooferSpeaker Position Distance Speakers Menu Calibration Use the OSD to navigate to the Speaker Calibration menuCrossover Adjustment OSD Popup Volume, Source, and Mode Video DefaultVideo Delay VID2/MON2 OUTSoftware Menu Special Features of the Emotiva DMC-1 Bass ManagementSurround Modes for 2 Channel Source Material Dolby PRO Logic II and Dolby PRO Logic PartyJazz Club Surround Modes for Multi-Channel Sources Source DirectDTS DTS ES Tuning Stations Manually Tuning Stations DirectlySetting the Presets Tuner OperationRecalling a Preset Station Scanning PresetsRecording Recording to a Tape Player Indicators Zone 2 AdjustConnections Page Software Upgrades on CD Speaker Placement Tips Tips Before You BeginFront Speakers Center SpeakerSide-Axis Speakers Surround SpeakersSurround Back Speakers Subwoofer LocationPlay a test Tone or low bass music Place the subwoofer Remote Control Codes Audio ComponentsCable Boxes DVD Players Laserdisc PlayersSatellite/DSS Receivers Televisions VCRs Page Troubleshooting Guide No Sound from one or more full range speakersSee pages See page 50Make sure the disc is not dirty or scratched See pages 43Zone 2 does not play digital inputs Hum Noises Favorite Settings Log Video Settings Selection RS-232 Port Rear Main I/R Rear Zone 2 I/R Front Panel I/RDVD SAT VID Tuner Tape Phono PositionTechnical Specifications XLR OutputsLicensing and Trademark Disclosures DTS DisclosureLimited Warranty Service Assistance for the DMC-1Emotiva Page Franklin, TN

DMC-1 specifications

The Emotiva DMC-1 is an advanced audio control processor designed to elevate your home theater experience to new heights. With a blend of modern technology and a commitment to high-fidelity sound reproduction, the DMC-1 is equipped with features that cater to both audiophiles and casual listeners alike.

One of the standout features of the DMC-1 is its capability to handle 16 channels of audio processing. This allows it to support up to 7.1.8 Dolby Atmos configurations, enabling an immersive sound experience that envelops listeners in their favorite films and music. The DMC-1 also supports DTS:X, providing an additional layer of flexibility for home theater enthusiasts seeking to create a customized audio setup.

At the heart of the DMC-1 is its state-of-the-art DAC (digital-to-analog converter) technology, which ensures that audio signals are converted with pristine accuracy. This includes high-resolution audio formats up to 24-bit/192kHz, allowing users to enjoy their favorite tracks and movies with remarkable clarity and detail.

The DMC-1 also integrates robust room calibration technology, featuring Audyssey MultEQ XT32. This allows the DMC-1 to analyze the acoustics of your room and optimize audio output for the best possible sound experience. This feature is vital for creating balanced audio in spaces that may have irregular dimensions or reflective surfaces.

Another key characteristic of the DMC-1 is its diverse connectivity options. With multiple HDMI inputs and outputs, the processor is well-equipped to handle various sources, from gaming consoles to streaming devices and Blu-ray players. In addition, the DMC-1 supports HDMI 2.0 with HDCP 2.2, providing compatibility with 4K Ultra HD content and HDR formats.

Emotiva's focus on user experience is evident in the DMC-1’s intuitive interface. It includes a full-color LCD screen and customizable on-screen menus, making navigation effortless. Additionally, the DMC-1 comes with a dedicated remote control, as well as integration options for control systems, making it easy to include in any smart home setup.

In conclusion, the Emotiva DMC-1 is a versatile and powerful audio control processor that promises to enhance any home theater system. With its advanced audio processing capabilities, high-quality DAC technology, automated room calibration, extensive connectivity options, and user-friendly interface, the DMC-1 stands out as a top choice for those seeking exceptional audio performance. Whether you're a movie buff, a music lover, or a gaming enthusiast, the DMC-1 delivers a level of sound quality and precision that is sure to impress.
Top Page Image Contents