Emotiva DMC-1 manual Connections, Indicators, Zone 2 Adjust

Page 70

Zone 2 Operation

If you have an amplifier and a pair of speakers in a second room or area (Zone 2), they can play an analog stereo source independent of what is playing in the Home Theater room (Main Zone). You can also play the same source as selected in the Main Zone. Multi-channels sources will be down mixed to stereo, if applicable.

Zone 2 plays stereo sources, and is unaffected by the Tone controls, DSP, surround modes or bass management.

Connections

The connections for Zone 2 are shown on pages 35-36.

Note: Zone 2 can play analog sources independent of what is playing in the Main Zone. It cannot play from a digital-only source unless that input is selected and playing in the Main Zone. To play a source such as a DVD or CD player in Zone 2 independent of the Main Zone, make sure you also connect the player’s L-R analog audio output to the DMC-1.

Indicators

The front panel has two LED’s to show the Zone 2 status:

Zone 2 Power This LED is always on when Zone 2 is on. If it is off, there will be no output to the Zone 2 amplifier.

Zone 2 Adjust

This turns on whenever the Zone 2 source or volume is being changed.

Note: if this is on, then any adjustments you make of volume or input, will affect Zone 2, not the Main Zone.

In addition to these LEDs, the front panel display will show the input and volume adjustment.

Use the front panel display to

indicate when Zone 2 is powered and when commands are received for Zone 2

Turning on Zone 2

Use the On Screen Display in the Main Zone to check that Zone 2 is enabled. (See page 55 for details). This enables the Zone 2 system, but it still has to be turned on.

Press the remote’s ZONE 2 button.The remote’s POWER,VOLUME and MUTE buttons then work for Zone 2. The remote display changes as in PAGE 1.

Page 70

Page 69 Page 71
Image 70
Page 69 Page 71
Contents USER’S Guide Page Table of Contents Audio Outputs Audio InputsFM Antenna AM Antenna Digital Inputs Digital OutputParty Main Zone MenuVideo Menu Subwoofer ModeZone 2 Menu Tuner Operation Recording Zone 2 OperationTechnical Specifications Licensing and Trademark Disclosures Safety Precautions Page NEC National Electrical Code Standards Thank You for your DMC-1 Purchase Dear Home Entertainment EnthusiastDMC-1 Unpacking the DMC-1Recording the Serial Number Serial Number Place of Purchase Date of PurchaseFeatures of the DMC-1 A/V Controller Important Please note the DMC-1 DMC-1 Front Panel FeaturesPower Button Is operated from the DMC-1 remoteDTS Dolby DigitalDigi Additional Front Panel Features Panel DIM ButtonComponent Video DMC-1 Rear Panel LayoutAudio/Video Inputs Audio/Video Outputs Channels10 8-CH Analog Input Stereo Outputs FM AntennaGround Screw Side-Axis OutputsIEC Line Cord Socket IEEE-1394 Firewire PortDigital Inputs AC Power Considerations Installation and ConnectionsConnection Tips for Superior Sound Page What is Component Video? What is Composite Video?What is S-Video? Connection Tips for Video Quality and FlexibilityVideo Output to the Main Screen and OSD Video Up ConversionZone Specific Turn-On Triggers Here are two connection options OptionConnection Diagrams Page Connecting to the TV or Projector using Component Video Connecting a VCR Analog Audio and Composite Video Connecting a CD Player Analog Audio Connecting a Cassette Tape or DAT Deck Connecting the 8-Channel Analog Inputs Connecting the AM and FM Antennas Connecting an Amplifier Main Zone Connecting an Amplifier Zone Connecting an Amplifier Zone Overview of the DMC-1 Remote Button LayoutDevice Buttons LCD DisplayButton and Display Light ButtonAdding Batteries to the Remote Control Quick Start Setup InstructionsQuick Start Instructions for DMC-1 Setup · Speaker Size · Speaker Calibration · Speaker PositionDistance menu Available and it is highly recommendedA cohesive sound field Feature Number Turning on the Main Zone Operation of the DMC-1 using the RemoteTurning on Zone Programming and Configuring Your Components PRO Learn FAV Macro Punch Recal Erase Edit Light CloneLearn FAV Setup Erase Recal Recall Clone OSD Activation On-Screen Display OSD FunctionsVideo Connections DVD Digital 48KTrim Menu How to Navigate the OSD MenusOSD Menus UP Arrow Right Arrow Left Arrow Down ArrowModes Menu DTS LFEInputs Menu Tone MenuSelected. Also, this input only works in the Main Tuner Preset Menu Saving AM/FM PresetsPower Up Volume Mode Settings MenusPower Up Source Power Up VolumeMain Speakers Speakers Menu SizeSIDE-AXIS Speakers Surround Back Speakers Surround SpeakersCenter Speaker SubwooferSpeaker Position Distance Speakers Menu Calibration Use the OSD to navigate to the Speaker Calibration menuCrossover Adjustment Video Delay OSD Popup Volume, Source, and ModeVideo Default VID2/MON2 OUTSoftware Menu Bass Management Special Features of the Emotiva DMC-1Surround Modes for 2 Channel Source Material Party Dolby PRO Logic II and Dolby PRO LogicJazz Club Source Direct Surround Modes for Multi-Channel SourcesDTS DTS ES Setting the Presets Tuning Stations ManuallyTuning Stations Directly Tuner OperationRecalling a Preset Station Scanning PresetsRecording Recording to a Tape Player Zone 2 Adjust IndicatorsConnections Page Software Upgrades on CD Speaker Placement Tips Tips Before You BeginFront Speakers Center SpeakerSide-Axis Speakers Surround SpeakersSurround Back Speakers Subwoofer LocationPlay a test Tone or low bass music Place the subwoofer Remote Control Codes Audio ComponentsCable Boxes Laserdisc Players DVD PlayersSatellite/DSS Receivers Televisions VCRs Page Troubleshooting Guide No Sound from one or more full range speakersSee pages See page 50Make sure the disc is not dirty or scratched See pages 43Zone 2 does not play digital inputs Hum Noises Favorite Settings Log Video Settings Selection RS-232 Port Rear Main I/R Rear Zone 2 I/R Front Panel I/RDVD SAT VID Tuner Tape Phono PositionTechnical Specifications XLR OutputsLicensing and Trademark Disclosures DTS DisclosureService Assistance for the DMC-1 Limited WarrantyEmotiva Page Franklin, TN

DMC-1 specifications

The Emotiva DMC-1 is an advanced audio control processor designed to elevate your home theater experience to new heights. With a blend of modern technology and a commitment to high-fidelity sound reproduction, the DMC-1 is equipped with features that cater to both audiophiles and casual listeners alike.

One of the standout features of the DMC-1 is its capability to handle 16 channels of audio processing. This allows it to support up to 7.1.8 Dolby Atmos configurations, enabling an immersive sound experience that envelops listeners in their favorite films and music. The DMC-1 also supports DTS:X, providing an additional layer of flexibility for home theater enthusiasts seeking to create a customized audio setup.

At the heart of the DMC-1 is its state-of-the-art DAC (digital-to-analog converter) technology, which ensures that audio signals are converted with pristine accuracy. This includes high-resolution audio formats up to 24-bit/192kHz, allowing users to enjoy their favorite tracks and movies with remarkable clarity and detail.

The DMC-1 also integrates robust room calibration technology, featuring Audyssey MultEQ XT32. This allows the DMC-1 to analyze the acoustics of your room and optimize audio output for the best possible sound experience. This feature is vital for creating balanced audio in spaces that may have irregular dimensions or reflective surfaces.

Another key characteristic of the DMC-1 is its diverse connectivity options. With multiple HDMI inputs and outputs, the processor is well-equipped to handle various sources, from gaming consoles to streaming devices and Blu-ray players. In addition, the DMC-1 supports HDMI 2.0 with HDCP 2.2, providing compatibility with 4K Ultra HD content and HDR formats.

Emotiva's focus on user experience is evident in the DMC-1’s intuitive interface. It includes a full-color LCD screen and customizable on-screen menus, making navigation effortless. Additionally, the DMC-1 comes with a dedicated remote control, as well as integration options for control systems, making it easy to include in any smart home setup.

In conclusion, the Emotiva DMC-1 is a versatile and powerful audio control processor that promises to enhance any home theater system. With its advanced audio processing capabilities, high-quality DAC technology, automated room calibration, extensive connectivity options, and user-friendly interface, the DMC-1 stands out as a top choice for those seeking exceptional audio performance. Whether you're a movie buff, a music lover, or a gaming enthusiast, the DMC-1 delivers a level of sound quality and precision that is sure to impress.
Top Page Image Contents