Emotiva DMC-1 Tuner Operation, Tuner and the OSD, Tuning Stations Manually, Setting the Presets

Page 67

Tuner Operation

The Tuner is selected either by rotating the manual input selector on the front panel, or by touching the TUNER button in the remote’s EMO mode. The front panel display shows the frequency of the last station you were listening to.

The FM Tuner can tune stations from 87.5 MHz to 108.0 MHz in 0.2 MHz steps (.05 MHz steps for some international models).The AM Tuner range is 530 kHz to 1710 kHz in 10 kHz steps (531 kHz to 1710 kHz in 9 kHz steps for some international models).

Tuner and the OSD

Page 54 shows how to set up the Tuner using the on screen display.

Tuning Stations Manually

Use the front panel AM/FM button to select either the AM or FM band, and then use one of these three ways to tune stations manually:

1.Touch UP or DOWN momentarily to change the tuner by one frequency step.

2.Hold UP or DOWN for a second or so, then release to start the scanning feature. The DMC-1 will scan to the next station, pause on it for a few seconds to allow you to hear what is offered there, and then scan to the next, and so on. Pressing UP or DOWN stops the scanning process.

3.Hold UP or DOWN for an extended period to make the tuner speed across the band without stopping on a station. The tuner will begin scanning for stations when you release the button. Pressing UP or DOWN stops the scanning.

4.When a station is tuned, it can be set as a preset for easy recall, see “Setting the Presets” in the next column.

Tuning Stations Directly

Use the AM/FM button to select either the AM or FM band and then press the DIRECT button. Within a few seconds, enter the station’s frequency by using the preset number buttons. For example, to tune to radio station 97.3, press DIRECT, then 9, then 7 and then 3.

Setting the Presets

Once you have tuned in a station, press and hold a preset button until the display flashes to show the memory has been set. Use the +10 button to add presets higher than 9, and hold the last button pressed for a few seconds.

Page 67

Image 67
Contents USER’S Guide Page Table of Contents Digital Inputs Digital Output Audio InputsFM Antenna AM Antenna Audio OutputsMain Zone Menu PartyTuner Operation Recording Zone 2 Operation Subwoofer ModeZone 2 Menu Video MenuTechnical Specifications Licensing and Trademark Disclosures Safety Precautions Page NEC National Electrical Code Standards Dear Home Entertainment Enthusiast Thank You for your DMC-1 PurchaseSerial Number Place of Purchase Date of Purchase Unpacking the DMC-1Recording the Serial Number DMC-1Features of the DMC-1 A/V Controller Is operated from the DMC-1 remote DMC-1 Front Panel FeaturesPower Button Important Please note the DMC-1DTS Dolby DigitalDigi Panel DIM Button Additional Front Panel FeaturesChannels DMC-1 Rear Panel LayoutAudio/Video Inputs Audio/Video Outputs Component Video10 8-CH Analog Input Side-Axis Outputs FM AntennaGround Screw Stereo OutputsIEC Line Cord Socket IEEE-1394 Firewire PortDigital Inputs AC Power Considerations Installation and ConnectionsConnection Tips for Superior Sound Page Connection Tips for Video Quality and Flexibility What is Composite Video?What is S-Video? What is Component Video?Video Output to the Main Screen and OSD Video Up ConversionZone Specific Turn-On Triggers Option Here are two connection optionsConnection Diagrams Page Connecting to the TV or Projector using Component Video Connecting a VCR Analog Audio and Composite Video Connecting a CD Player Analog Audio Connecting a Cassette Tape or DAT Deck Connecting the 8-Channel Analog Inputs Connecting the AM and FM Antennas Connecting an Amplifier Main Zone Connecting an Amplifier Zone Connecting an Amplifier Zone Button Layout Overview of the DMC-1 RemoteButton LCD DisplayButton and Display Light Device ButtonsAdding Batteries to the Remote Control Quick Start Setup InstructionsQuick Start Instructions for DMC-1 Setup · Speaker Calibration · Speaker Position · Speaker SizeDistance menu Available and it is highly recommendedA cohesive sound field Feature Number Turning on the Main Zone Operation of the DMC-1 using the RemoteTurning on Zone PRO Learn FAV Macro Punch Recal Erase Edit Light Clone Programming and Configuring Your ComponentsLearn FAV Setup Erase Recal Recall Clone DVD Digital 48K On-Screen Display OSD FunctionsVideo Connections OSD ActivationUP Arrow Right Arrow Left Arrow Down Arrow How to Navigate the OSD MenusOSD Menus Trim MenuDTS LFE Modes MenuInputs Menu Tone MenuSelected. Also, this input only works in the Main Saving AM/FM Presets Tuner Preset MenuPower Up Volume Settings MenusPower Up Source Power Up Volume ModeMain Speakers Speakers Menu SizeSIDE-AXIS Speakers Subwoofer Surround SpeakersCenter Speaker Surround Back SpeakersSpeaker Position Distance Use the OSD to navigate to the Speaker Calibration menu Speakers Menu CalibrationCrossover Adjustment VID2/MON2 OUT OSD Popup Volume, Source, and ModeVideo Default Video DelaySoftware Menu Bass Management Special Features of the Emotiva DMC-1Surround Modes for 2 Channel Source Material Party Dolby PRO Logic II and Dolby PRO LogicJazz Club Source Direct Surround Modes for Multi-Channel SourcesDTS DTS ES Tuner Operation Tuning Stations ManuallyTuning Stations Directly Setting the PresetsScanning Presets Recalling a Preset StationRecording Recording to a Tape Player Zone 2 Adjust IndicatorsConnections Page Software Upgrades on CD Tips Before You Begin Speaker Placement TipsCenter Speaker Front SpeakersSurround Speakers Side-Axis SpeakersSubwoofer Location Surround Back SpeakersPlay a test Tone or low bass music Place the subwoofer Audio Components Remote Control CodesCable Boxes Laserdisc Players DVD PlayersSatellite/DSS Receivers Televisions VCRs Page No Sound from one or more full range speakers Troubleshooting GuideSee page 50 See pagesSee pages 43 Make sure the disc is not dirty or scratchedZone 2 does not play digital inputs Hum Noises Favorite Settings Log RS-232 Port Rear Main I/R Rear Zone 2 I/R Front Panel I/R Video Settings SelectionPosition DVD SAT VID Tuner Tape PhonoXLR Outputs Technical SpecificationsDTS Disclosure Licensing and Trademark DisclosuresService Assistance for the DMC-1 Limited WarrantyEmotiva Page Franklin, TN

DMC-1 specifications

The Emotiva DMC-1 is an advanced audio control processor designed to elevate your home theater experience to new heights. With a blend of modern technology and a commitment to high-fidelity sound reproduction, the DMC-1 is equipped with features that cater to both audiophiles and casual listeners alike.

One of the standout features of the DMC-1 is its capability to handle 16 channels of audio processing. This allows it to support up to 7.1.8 Dolby Atmos configurations, enabling an immersive sound experience that envelops listeners in their favorite films and music. The DMC-1 also supports DTS:X, providing an additional layer of flexibility for home theater enthusiasts seeking to create a customized audio setup.

At the heart of the DMC-1 is its state-of-the-art DAC (digital-to-analog converter) technology, which ensures that audio signals are converted with pristine accuracy. This includes high-resolution audio formats up to 24-bit/192kHz, allowing users to enjoy their favorite tracks and movies with remarkable clarity and detail.

The DMC-1 also integrates robust room calibration technology, featuring Audyssey MultEQ XT32. This allows the DMC-1 to analyze the acoustics of your room and optimize audio output for the best possible sound experience. This feature is vital for creating balanced audio in spaces that may have irregular dimensions or reflective surfaces.

Another key characteristic of the DMC-1 is its diverse connectivity options. With multiple HDMI inputs and outputs, the processor is well-equipped to handle various sources, from gaming consoles to streaming devices and Blu-ray players. In addition, the DMC-1 supports HDMI 2.0 with HDCP 2.2, providing compatibility with 4K Ultra HD content and HDR formats.

Emotiva's focus on user experience is evident in the DMC-1’s intuitive interface. It includes a full-color LCD screen and customizable on-screen menus, making navigation effortless. Additionally, the DMC-1 comes with a dedicated remote control, as well as integration options for control systems, making it easy to include in any smart home setup.

In conclusion, the Emotiva DMC-1 is a versatile and powerful audio control processor that promises to enhance any home theater system. With its advanced audio processing capabilities, high-quality DAC technology, automated room calibration, extensive connectivity options, and user-friendly interface, the DMC-1 stands out as a top choice for those seeking exceptional audio performance. Whether you're a movie buff, a music lover, or a gaming enthusiast, the DMC-1 delivers a level of sound quality and precision that is sure to impress.