Emotiva DMC-1 manual Safety Precautions

Page 8

Safety Precautions

Read this Owner’s Guide thoroughly before attempting to install and configure the Emotiva DMC-1 Media Center. All the safety and operation instructions should be read before any operation of the component(s) begin. After successful installation and configuration of the Emotiva DMC-1 Media Center, be sure to retain this manual in a safe place for any future reference needs.

All warnings on the Emotiva DMC-1 Media Center and in these operating instructions should be followed. Safety is a key component to a long lasting and trouble free installation. The vast majority of the subsequent safety precautions involve simple common sense. If you are not comfortable with the installation of audio/video entertainment equipment, it will be to your benefit to seek the services of a qualified installation professional.

The Emotiva DMC-1 Media Center should NEVER be used near water such as a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc.

The Emotiva DMC-1 Media Center should be situated so that its location or installation position does not interfere with proper ventilation.

The Emotiva DMC-1 Media Center should not be situated on a bed, sofa, rug, or similar surface that may block any ventilation openings; or placed in a built-in installation such as a bookcase, cabinet, or closed equipment rack that may impede the flow of air through ventilation openings. If installed in a closed equipment rack for custom installations, be sure to add forced air ventilation so that it has adequate air circulation.

The Emotiva DMC-1 Media Center should be situated away from heat sources such as radiators, or any other devices which produce heat.

The Emotiva DMC-1 Media Center should be connected to a power supply only of the type described in this Owner’s Guide and what is labeled on the DMC-1 component. Power supply cords should be routed so that they are not in high foot traffic areas or pinched by items placed upon or against them, paying particular attention to cords at the wall plugs, convenience receptacles, and the point where they connect into the DMC-1 Media Center. The power cord of the DMC-1 Media Center should be unplugged from the outlet when unused for a long period of time.

When it’s time for cleaning the Emotiva DMC-1 Media Center, it should be cleaned only as recommended in this Owner’s Guide. Never spray liquids directly into the component’s vent openings. Care should be taken so that small objects do not fall into the inside of the DMC-1 Media Center.

The following situations require your Emotiva DMC-1 Media Center is serviced only by qualified service personnel:

1. The power-supply cord or the plug has been damaged; or

2. Objects have fallen, or liquid has spilled into the component; or

3. The DMC-1 has been exposed to rain; or

4. The DMC-1 does not appear to operate normally or exhibits a marked change in performance; or

5. The DMC-1 has been dropped, or its enclosure or chassis is damaged.

Page 8

Image 8
Contents USER’S Guide Page Table of Contents Audio Inputs FM Antenna AM AntennaAudio Outputs Digital Inputs Digital OutputParty Main Zone MenuSubwoofer Mode Zone 2 MenuVideo Menu Tuner Operation Recording Zone 2 OperationTechnical Specifications Licensing and Trademark Disclosures Safety Precautions Page NEC National Electrical Code Standards Thank You for your DMC-1 Purchase Dear Home Entertainment EnthusiastUnpacking the DMC-1 Recording the Serial NumberDMC-1 Serial Number Place of Purchase Date of PurchaseFeatures of the DMC-1 A/V Controller DMC-1 Front Panel Features Power ButtonImportant Please note the DMC-1 Is operated from the DMC-1 remoteDigi Dolby DigitalDTS Additional Front Panel Features Panel DIM ButtonDMC-1 Rear Panel Layout Audio/Video Inputs Audio/Video OutputsComponent Video Channels10 8-CH Analog Input FM Antenna Ground ScrewStereo Outputs Side-Axis OutputsDigital Inputs IEEE-1394 Firewire PortIEC Line Cord Socket Connection Tips for Superior Sound Installation and ConnectionsAC Power Considerations Page What is Composite Video? What is S-Video?What is Component Video? Connection Tips for Video Quality and FlexibilityZone Specific Turn-On Triggers Video Up ConversionVideo Output to the Main Screen and OSD Here are two connection options OptionConnection Diagrams Page Connecting to the TV or Projector using Component Video Connecting a VCR Analog Audio and Composite Video Connecting a CD Player Analog Audio Connecting a Cassette Tape or DAT Deck Connecting the 8-Channel Analog Inputs Connecting the AM and FM Antennas Connecting an Amplifier Main Zone Connecting an Amplifier Zone Connecting an Amplifier Zone Overview of the DMC-1 Remote Button LayoutLCD Display Button and Display LightDevice Buttons ButtonQuick Start Instructions for DMC-1 Setup Quick Start Setup InstructionsAdding Batteries to the Remote Control · Speaker Size · Speaker Calibration · Speaker PositionA cohesive sound field Available and it is highly recommendedDistance menu Feature Number Turning on Zone Operation of the DMC-1 using the RemoteTurning on the Main Zone Programming and Configuring Your Components PRO Learn FAV Macro Punch Recal Erase Edit Light CloneLearn FAV Setup Erase Recal Recall Clone On-Screen Display OSD Functions Video ConnectionsOSD Activation DVD Digital 48KHow to Navigate the OSD Menus OSD MenusTrim Menu UP Arrow Right Arrow Left Arrow Down ArrowModes Menu DTS LFESelected. Also, this input only works in the Main Tone MenuInputs Menu Tuner Preset Menu Saving AM/FM PresetsSettings Menus Power Up SourcePower Up Volume Mode Power Up VolumeSIDE-AXIS Speakers Speakers Menu SizeMain Speakers Surround Speakers Center SpeakerSurround Back Speakers SubwooferSpeaker Position Distance Speakers Menu Calibration Use the OSD to navigate to the Speaker Calibration menuCrossover Adjustment OSD Popup Volume, Source, and Mode Video DefaultVideo Delay VID2/MON2 OUTSoftware Menu Surround Modes for 2 Channel Source Material Special Features of the Emotiva DMC-1Bass Management Jazz Club Dolby PRO Logic II and Dolby PRO LogicParty DTS Surround Modes for Multi-Channel SourcesSource Direct DTS ES Tuning Stations Manually Tuning Stations DirectlySetting the Presets Tuner OperationRecalling a Preset Station Scanning PresetsRecording Recording to a Tape Player Connections IndicatorsZone 2 Adjust Page Software Upgrades on CD Speaker Placement Tips Tips Before You BeginFront Speakers Center SpeakerSide-Axis Speakers Surround SpeakersSurround Back Speakers Subwoofer LocationPlay a test Tone or low bass music Place the subwoofer Remote Control Codes Audio ComponentsCable Boxes Satellite/DSS Receivers DVD PlayersLaserdisc Players Televisions VCRs Page Troubleshooting Guide No Sound from one or more full range speakersSee pages See page 50Make sure the disc is not dirty or scratched See pages 43Zone 2 does not play digital inputs Hum Noises Favorite Settings Log Video Settings Selection RS-232 Port Rear Main I/R Rear Zone 2 I/R Front Panel I/RDVD SAT VID Tuner Tape Phono PositionTechnical Specifications XLR OutputsLicensing and Trademark Disclosures DTS DisclosureEmotiva Limited WarrantyService Assistance for the DMC-1 Page Franklin, TN

DMC-1 specifications

The Emotiva DMC-1 is an advanced audio control processor designed to elevate your home theater experience to new heights. With a blend of modern technology and a commitment to high-fidelity sound reproduction, the DMC-1 is equipped with features that cater to both audiophiles and casual listeners alike.

One of the standout features of the DMC-1 is its capability to handle 16 channels of audio processing. This allows it to support up to 7.1.8 Dolby Atmos configurations, enabling an immersive sound experience that envelops listeners in their favorite films and music. The DMC-1 also supports DTS:X, providing an additional layer of flexibility for home theater enthusiasts seeking to create a customized audio setup.

At the heart of the DMC-1 is its state-of-the-art DAC (digital-to-analog converter) technology, which ensures that audio signals are converted with pristine accuracy. This includes high-resolution audio formats up to 24-bit/192kHz, allowing users to enjoy their favorite tracks and movies with remarkable clarity and detail.

The DMC-1 also integrates robust room calibration technology, featuring Audyssey MultEQ XT32. This allows the DMC-1 to analyze the acoustics of your room and optimize audio output for the best possible sound experience. This feature is vital for creating balanced audio in spaces that may have irregular dimensions or reflective surfaces.

Another key characteristic of the DMC-1 is its diverse connectivity options. With multiple HDMI inputs and outputs, the processor is well-equipped to handle various sources, from gaming consoles to streaming devices and Blu-ray players. In addition, the DMC-1 supports HDMI 2.0 with HDCP 2.2, providing compatibility with 4K Ultra HD content and HDR formats.

Emotiva's focus on user experience is evident in the DMC-1’s intuitive interface. It includes a full-color LCD screen and customizable on-screen menus, making navigation effortless. Additionally, the DMC-1 comes with a dedicated remote control, as well as integration options for control systems, making it easy to include in any smart home setup.

In conclusion, the Emotiva DMC-1 is a versatile and powerful audio control processor that promises to enhance any home theater system. With its advanced audio processing capabilities, high-quality DAC technology, automated room calibration, extensive connectivity options, and user-friendly interface, the DMC-1 stands out as a top choice for those seeking exceptional audio performance. Whether you're a movie buff, a music lover, or a gaming enthusiast, the DMC-1 delivers a level of sound quality and precision that is sure to impress.