Emotiva DMC-1 manual Technical Specifications, XLR Outputs

Page 92
AM Tuner Section AM Range:

Technical Specifications

Line Level Inputs

 

Sensitivity

 

(for 0.5 V output): 125mV

Phono:

1.6mV

Frequency Response:

 

+/- 0.5 dB:

20 Hz-20 kHz

Signal to Noise Ratio

 

(relative to 2V out):

Analog 97 dB

 

Digital 105 dB

Distortion (THD):

<0.03%

Separation (@1kHz):

70dB

Tone Control

Bass: +/- 10dB

Treble:

+/- 10dB

Audio Output Section

 

Frequency Response

 

Main Channels (Large):

20Hz-20kHz

FM Tuner Section

 

FM Range:

87.5-108MHz

 

 

0.2MHz Steps

Usable FM Sensitivity (Mono)

 

 

1.6uV@75 Ohms

@75kHz

15.2 dBf (DEV 30dB)

50dB Quieting Sensitivity (Stereo)

31.6 uV @75 Ohms

41.2 dBf

Audio Output Bandwidth (+.5, -3dB)

30Hz-15kHz

530-1710kHz 10kHz steps

Usable AM Sensitivity (S/N 30% modulated) @20dB S/N 16uV / (600uV/m)

@1mV input 48dB

Subwoofer (LFE):

20Hz-160Hz

(Note - The subwoofer crossover is set at 160Hz. The subwoofer plays the bass from the other channels using the LFE Bass Management function in the signal processing formats)

Delay Adjustment

 

Center:

0-25 ms

Rear: 0-25 ms

Video Section

 

Video Inputs/Outputs:

1V p-p, 75 Ohm

Bandwidth

 

Component Video:

100MHz, -1.5dB

S-Video: 6MHz, -2dB Composite Video: 18MHz, -1.5dB

(Video transcoder / up converter circuitry is completely automatic)

Trigger Outputs

12 Volt MAIN and ZONE2 Trigger Current load <500mA total

MAIN Zone Trigger Relay Contact Rating

24VDC @ 2a Max

XLR Outputs

 

 

 

Pin #3

 

Pin #1 = Ground

 

 

 

 

 

 

Pin #1

 

 

 

 

Pin #2

Pin #2 = Positive

 

 

 

 

 

 

Pin #3 = Negative

 

 

 

 

 

 

Infrared Outputs (Optically Isolated)

1/8” Jacks @ 12V level

Power Requirements

120VAC, 60Hz, 40W

Dimensions

17”Wx5.75”Hx15.5”D

Net Weight

22 lbs

Page 92

Image 92
Contents USER’S Guide Page Table of Contents Audio Inputs FM Antenna AM AntennaAudio Outputs Digital Inputs Digital OutputParty Main Zone MenuSubwoofer Mode Zone 2 MenuVideo Menu Tuner Operation Recording Zone 2 OperationTechnical Specifications Licensing and Trademark Disclosures Safety Precautions Page NEC National Electrical Code Standards Thank You for your DMC-1 Purchase Dear Home Entertainment EnthusiastUnpacking the DMC-1 Recording the Serial NumberDMC-1 Serial Number Place of Purchase Date of PurchaseFeatures of the DMC-1 A/V Controller DMC-1 Front Panel Features Power ButtonImportant Please note the DMC-1 Is operated from the DMC-1 remoteDigi Dolby DigitalDTS Additional Front Panel Features Panel DIM ButtonDMC-1 Rear Panel Layout Audio/Video Inputs Audio/Video OutputsComponent Video Channels10 8-CH Analog Input FM Antenna Ground ScrewStereo Outputs Side-Axis OutputsDigital Inputs IEEE-1394 Firewire PortIEC Line Cord Socket Connection Tips for Superior Sound Installation and ConnectionsAC Power Considerations Page What is Composite Video? What is S-Video?What is Component Video? Connection Tips for Video Quality and FlexibilityZone Specific Turn-On Triggers Video Up ConversionVideo Output to the Main Screen and OSD Here are two connection options OptionConnection Diagrams Page Connecting to the TV or Projector using Component Video Connecting a VCR Analog Audio and Composite Video Connecting a CD Player Analog Audio Connecting a Cassette Tape or DAT Deck Connecting the 8-Channel Analog Inputs Connecting the AM and FM Antennas Connecting an Amplifier Main Zone Connecting an Amplifier Zone Connecting an Amplifier Zone Overview of the DMC-1 Remote Button LayoutLCD Display Button and Display LightDevice Buttons ButtonQuick Start Instructions for DMC-1 Setup Quick Start Setup InstructionsAdding Batteries to the Remote Control · Speaker Size · Speaker Calibration · Speaker PositionA cohesive sound field Available and it is highly recommendedDistance menu Feature Number Turning on Zone Operation of the DMC-1 using the RemoteTurning on the Main Zone Programming and Configuring Your Components PRO Learn FAV Macro Punch Recal Erase Edit Light CloneLearn FAV Setup Erase Recal Recall Clone On-Screen Display OSD Functions Video ConnectionsOSD Activation DVD Digital 48KHow to Navigate the OSD Menus OSD MenusTrim Menu UP Arrow Right Arrow Left Arrow Down ArrowModes Menu DTS LFESelected. Also, this input only works in the Main Tone MenuInputs Menu Tuner Preset Menu Saving AM/FM PresetsSettings Menus Power Up SourcePower Up Volume Mode Power Up VolumeSIDE-AXIS Speakers Speakers Menu SizeMain Speakers Surround Speakers Center SpeakerSurround Back Speakers SubwooferSpeaker Position Distance Speakers Menu Calibration Use the OSD to navigate to the Speaker Calibration menuCrossover Adjustment OSD Popup Volume, Source, and Mode Video DefaultVideo Delay VID2/MON2 OUTSoftware Menu Surround Modes for 2 Channel Source Material Special Features of the Emotiva DMC-1Bass Management Jazz Club Dolby PRO Logic II and Dolby PRO LogicParty DTS Surround Modes for Multi-Channel SourcesSource Direct DTS ES Tuning Stations Manually Tuning Stations DirectlySetting the Presets Tuner OperationRecalling a Preset Station Scanning PresetsRecording Recording to a Tape Player Connections IndicatorsZone 2 Adjust Page Software Upgrades on CD Speaker Placement Tips Tips Before You BeginFront Speakers Center SpeakerSide-Axis Speakers Surround SpeakersSurround Back Speakers Subwoofer LocationPlay a test Tone or low bass music Place the subwoofer Remote Control Codes Audio ComponentsCable Boxes Satellite/DSS Receivers DVD PlayersLaserdisc Players Televisions VCRs Page Troubleshooting Guide No Sound from one or more full range speakersSee pages See page 50Make sure the disc is not dirty or scratched See pages 43Zone 2 does not play digital inputs Hum Noises Favorite Settings Log Video Settings Selection RS-232 Port Rear Main I/R Rear Zone 2 I/R Front Panel I/RDVD SAT VID Tuner Tape Phono PositionTechnical Specifications XLR OutputsLicensing and Trademark Disclosures DTS DisclosureEmotiva Limited WarrantyService Assistance for the DMC-1 Page Franklin, TN

DMC-1 specifications

The Emotiva DMC-1 is an advanced audio control processor designed to elevate your home theater experience to new heights. With a blend of modern technology and a commitment to high-fidelity sound reproduction, the DMC-1 is equipped with features that cater to both audiophiles and casual listeners alike.

One of the standout features of the DMC-1 is its capability to handle 16 channels of audio processing. This allows it to support up to 7.1.8 Dolby Atmos configurations, enabling an immersive sound experience that envelops listeners in their favorite films and music. The DMC-1 also supports DTS:X, providing an additional layer of flexibility for home theater enthusiasts seeking to create a customized audio setup.

At the heart of the DMC-1 is its state-of-the-art DAC (digital-to-analog converter) technology, which ensures that audio signals are converted with pristine accuracy. This includes high-resolution audio formats up to 24-bit/192kHz, allowing users to enjoy their favorite tracks and movies with remarkable clarity and detail.

The DMC-1 also integrates robust room calibration technology, featuring Audyssey MultEQ XT32. This allows the DMC-1 to analyze the acoustics of your room and optimize audio output for the best possible sound experience. This feature is vital for creating balanced audio in spaces that may have irregular dimensions or reflective surfaces.

Another key characteristic of the DMC-1 is its diverse connectivity options. With multiple HDMI inputs and outputs, the processor is well-equipped to handle various sources, from gaming consoles to streaming devices and Blu-ray players. In addition, the DMC-1 supports HDMI 2.0 with HDCP 2.2, providing compatibility with 4K Ultra HD content and HDR formats.

Emotiva's focus on user experience is evident in the DMC-1’s intuitive interface. It includes a full-color LCD screen and customizable on-screen menus, making navigation effortless. Additionally, the DMC-1 comes with a dedicated remote control, as well as integration options for control systems, making it easy to include in any smart home setup.

In conclusion, the Emotiva DMC-1 is a versatile and powerful audio control processor that promises to enhance any home theater system. With its advanced audio processing capabilities, high-quality DAC technology, automated room calibration, extensive connectivity options, and user-friendly interface, the DMC-1 stands out as a top choice for those seeking exceptional audio performance. Whether you're a movie buff, a music lover, or a gaming enthusiast, the DMC-1 delivers a level of sound quality and precision that is sure to impress.