Crossover Adjustment | Emotiva DMC-1 manual

SETTINGS Menus (Continued)

Dolby Digital, Dolby Pro Logic and DTS soundtracks are designed to be played back on a properly calibrated Home Theater. The sounds from each speaker will be at the correct relative levels, as the movie sound director designed them. Repeat the calibration if you change any speakers or your external power amplifiers. You should also run a new calibration whenever you move your seating relative to the speakers.

	Note: The range of adjustment is +/– 10 dB for each speaker.
	Crossover Adjustment
	The bass management system built into the DMC-1 allows
	you to redirect the low frequencies of your main and surround
	speakers to a subwoofer. The crossover point of the left and right
	main speakers can be selected from 40 Hz to 160 Hz. There is an
	additional selection for the center and surround speakers
	with the same range of adjustment between 40-160Hz.
	If you set the L-R CROSSOVER to 80 HZ (a good starting
��	point), left and right channel main speakers set to SMALL
	point), left and right channel main speakers set to SMALL
	receive frequencies above 80 Hz. The frequencies below 80
	Hz are then redirected to the subwoofer. The same scenario
	applies to the C-SURRsetting for center and surround
	speakers.

Most manufacturers provide a -3 dB specification for their speakers. This is the frequency where the speaker’s output has dropped by 3 dB. Set the DMC-1 crossover to this frequency or above. If you cannot find this, set the crossover to 80 Hz (the default). Set your subwoofer’s own crossover control to maximum frequency or bypassed mode. If it is set lower than the DMC-1, there would be a hole in the mid bass, and bass information would be missing.

Subwoofer Mode

The subwoofer output can be set to NORMAL or ENHANCED BASS

mode.

The Enhanced Bass mode provides an output to your subwoofer even

when you are listening to a stereo source with main speakers set

to LARGE. In the Normal mode, there would be no subwoofer

output in this case, and the bass would only come from the main speakers.

��

The Enhanced Bass mode has no effect if the main speakers are set to SMALL, as the subwoofer is automatically engaged. It also has no effect in 5.1 or greater surround modes.

Page 60

DMC-1 specifications

The Emotiva DMC-1 is an advanced audio control processor designed to elevate your home theater experience to new heights. With a blend of modern technology and a commitment to high-fidelity sound reproduction, the DMC-1 is equipped with features that cater to both audiophiles and casual listeners alike.

One of the standout features of the DMC-1 is its capability to handle 16 channels of audio processing. This allows it to support up to 7.1.8 Dolby Atmos configurations, enabling an immersive sound experience that envelops listeners in their favorite films and music. The DMC-1 also supports DTS:X, providing an additional layer of flexibility for home theater enthusiasts seeking to create a customized audio setup.

At the heart of the DMC-1 is its state-of-the-art DAC (digital-to-analog converter) technology, which ensures that audio signals are converted with pristine accuracy. This includes high-resolution audio formats up to 24-bit/192kHz, allowing users to enjoy their favorite tracks and movies with remarkable clarity and detail.

The DMC-1 also integrates robust room calibration technology, featuring Audyssey MultEQ XT32. This allows the DMC-1 to analyze the acoustics of your room and optimize audio output for the best possible sound experience. This feature is vital for creating balanced audio in spaces that may have irregular dimensions or reflective surfaces.

Another key characteristic of the DMC-1 is its diverse connectivity options. With multiple HDMI inputs and outputs, the processor is well-equipped to handle various sources, from gaming consoles to streaming devices and Blu-ray players. In addition, the DMC-1 supports HDMI 2.0 with HDCP 2.2, providing compatibility with 4K Ultra HD content and HDR formats.

Emotiva's focus on user experience is evident in the DMC-1’s intuitive interface. It includes a full-color LCD screen and customizable on-screen menus, making navigation effortless. Additionally, the DMC-1 comes with a dedicated remote control, as well as integration options for control systems, making it easy to include in any smart home setup.

In conclusion, the Emotiva DMC-1 is a versatile and powerful audio control processor that promises to enhance any home theater system. With its advanced audio processing capabilities, high-quality DAC technology, automated room calibration, extensive connectivity options, and user-friendly interface, the DMC-1 stands out as a top choice for those seeking exceptional audio performance. Whether you're a movie buff, a music lover, or a gaming enthusiast, the DMC-1 delivers a level of sound quality and precision that is sure to impress.