Emotiva DMC-1 manual OSD Popup Volume, Source, and Mode, Video Default, VID2/MON2 OUT, Video Delay

Page 61

SETTINGS Menus (Continued)

VIDEO Menu

OSD POPUP (Volume, Source, and Mode)

When

enabled, a “pop-up” message appears on your TV any time the volume (including mute or on-the-fly trims), source, or surround mode are changed. The OSD circuit in the DMC-1 is not switched into the video path unless called up by an OSD action. This allows for the best possible video reproduction

quality. When the OSD display activates, it is normal to see a slight flicker on the screen. This menu allows you to choose which, if any features, are enabled for OSD features after initial setup of the DMC-1.

Note: The OSD “pop-up” does not function on the

component video output. This is intentional, as we feel that the OSD insertion circuitry will degrade the performace of the component video circuitry due to the ultra wide bandwidth requirement for optimal component

video performace.

VIDEO DEFAULT

Select the video output where the“pop-up”text appears, either S or composite video, but not both. The full OSD is not affected by this menu item, as it is available on both.

VID2/MON2 OUT

VID2: the VCR2/MON2 outputs can be used for recording to a second VCR. There is no OSD, and the output is muted when VID2 is chosen as an input (to prevent feedback).

MON2: the VCR2/MON2 output becomes a second monitor output (with OSD) for another TV. It will not mute when VID2 is chosen.

VIDEO DELAY

This adjustment is useful if you have an external video processor in your system. Video signals may become delayed with respect to the audio signals. Although it is called Video Delay, it is actually a delay adjustment of the audio signals relative to the video signals.

Use the remote’s joystick pad to adjust the delay in one millisecond steps. An equal amount of delay time is added to all audio channels.

Note: The speakers keep their relative time delay settings which the DMC-1 calculates from the Speaker Position Menu settings. The video delay is just added on top. Leave the video delay at zero if you do not have an external video processor or if you detect any noticeable synchronization problems with dialogue.

Page 61

Page 60 Page 62
Image 61
Page 60 Page 62
Contents USER’S Guide Page Table of Contents FM Antenna AM Antenna Audio InputsAudio Outputs Digital Inputs Digital OutputMain Zone Menu PartyZone 2 Menu Subwoofer ModeVideo Menu Tuner Operation Recording Zone 2 OperationTechnical Specifications Licensing and Trademark Disclosures Safety Precautions Page NEC National Electrical Code Standards Dear Home Entertainment Enthusiast Thank You for your DMC-1 PurchaseRecording the Serial Number Unpacking the DMC-1DMC-1 Serial Number Place of Purchase Date of PurchaseFeatures of the DMC-1 A/V Controller Power Button DMC-1 Front Panel FeaturesImportant Please note the DMC-1 Is operated from the DMC-1 remoteDTS Dolby DigitalDigi Panel DIM Button Additional Front Panel FeaturesAudio/Video Inputs Audio/Video Outputs DMC-1 Rear Panel LayoutComponent Video Channels10 8-CH Analog Input Ground Screw FM AntennaStereo Outputs Side-Axis OutputsIEC Line Cord Socket IEEE-1394 Firewire PortDigital Inputs AC Power Considerations Installation and ConnectionsConnection Tips for Superior Sound Page What is S-Video? What is Composite Video?What is Component Video? Connection Tips for Video Quality and FlexibilityVideo Output to the Main Screen and OSD Video Up ConversionZone Specific Turn-On Triggers Option Here are two connection optionsConnection Diagrams Page Connecting to the TV or Projector using Component Video Connecting a VCR Analog Audio and Composite Video Connecting a CD Player Analog Audio Connecting a Cassette Tape or DAT Deck Connecting the 8-Channel Analog Inputs Connecting the AM and FM Antennas Connecting an Amplifier Main Zone Connecting an Amplifier Zone Connecting an Amplifier Zone Button Layout Overview of the DMC-1 RemoteButton and Display Light LCD DisplayDevice Buttons ButtonAdding Batteries to the Remote Control Quick Start Setup InstructionsQuick Start Instructions for DMC-1 Setup · Speaker Calibration · Speaker Position · Speaker SizeDistance menu Available and it is highly recommendedA cohesive sound field Feature Number Turning on the Main Zone Operation of the DMC-1 using the RemoteTurning on Zone PRO Learn FAV Macro Punch Recal Erase Edit Light Clone Programming and Configuring Your ComponentsLearn FAV Setup Erase Recal Recall Clone Video Connections On-Screen Display OSD FunctionsOSD Activation DVD Digital 48KOSD Menus How to Navigate the OSD MenusTrim Menu UP Arrow Right Arrow Left Arrow Down ArrowDTS LFE Modes MenuInputs Menu Tone MenuSelected. Also, this input only works in the Main Saving AM/FM Presets Tuner Preset MenuPower Up Source Settings MenusPower Up Volume Mode Power Up VolumeMain Speakers Speakers Menu SizeSIDE-AXIS Speakers Center Speaker Surround SpeakersSurround Back Speakers SubwooferSpeaker Position Distance Use the OSD to navigate to the Speaker Calibration menu Speakers Menu CalibrationCrossover Adjustment Video Default OSD Popup Volume, Source, and ModeVideo Delay VID2/MON2 OUTSoftware Menu Bass Management Special Features of the Emotiva DMC-1Surround Modes for 2 Channel Source Material Party Dolby PRO Logic II and Dolby PRO LogicJazz Club Source Direct Surround Modes for Multi-Channel SourcesDTS DTS ES Tuning Stations Directly Tuning Stations ManuallySetting the Presets Tuner OperationScanning Presets Recalling a Preset StationRecording Recording to a Tape Player Zone 2 Adjust IndicatorsConnections Page Software Upgrades on CD Tips Before You Begin Speaker Placement TipsCenter Speaker Front SpeakersSurround Speakers Side-Axis SpeakersSubwoofer Location Surround Back SpeakersPlay a test Tone or low bass music Place the subwoofer Audio Components Remote Control CodesCable Boxes Laserdisc Players DVD PlayersSatellite/DSS Receivers Televisions VCRs Page No Sound from one or more full range speakers Troubleshooting GuideSee page 50 See pagesSee pages 43 Make sure the disc is not dirty or scratchedZone 2 does not play digital inputs Hum Noises Favorite Settings Log RS-232 Port Rear Main I/R Rear Zone 2 I/R Front Panel I/R Video Settings SelectionPosition DVD SAT VID Tuner Tape PhonoXLR Outputs Technical SpecificationsDTS Disclosure Licensing and Trademark DisclosuresService Assistance for the DMC-1 Limited WarrantyEmotiva Page Franklin, TN

DMC-1 specifications

The Emotiva DMC-1 is an advanced audio control processor designed to elevate your home theater experience to new heights. With a blend of modern technology and a commitment to high-fidelity sound reproduction, the DMC-1 is equipped with features that cater to both audiophiles and casual listeners alike.

One of the standout features of the DMC-1 is its capability to handle 16 channels of audio processing. This allows it to support up to 7.1.8 Dolby Atmos configurations, enabling an immersive sound experience that envelops listeners in their favorite films and music. The DMC-1 also supports DTS:X, providing an additional layer of flexibility for home theater enthusiasts seeking to create a customized audio setup.

At the heart of the DMC-1 is its state-of-the-art DAC (digital-to-analog converter) technology, which ensures that audio signals are converted with pristine accuracy. This includes high-resolution audio formats up to 24-bit/192kHz, allowing users to enjoy their favorite tracks and movies with remarkable clarity and detail.

The DMC-1 also integrates robust room calibration technology, featuring Audyssey MultEQ XT32. This allows the DMC-1 to analyze the acoustics of your room and optimize audio output for the best possible sound experience. This feature is vital for creating balanced audio in spaces that may have irregular dimensions or reflective surfaces.

Another key characteristic of the DMC-1 is its diverse connectivity options. With multiple HDMI inputs and outputs, the processor is well-equipped to handle various sources, from gaming consoles to streaming devices and Blu-ray players. In addition, the DMC-1 supports HDMI 2.0 with HDCP 2.2, providing compatibility with 4K Ultra HD content and HDR formats.

Emotiva's focus on user experience is evident in the DMC-1’s intuitive interface. It includes a full-color LCD screen and customizable on-screen menus, making navigation effortless. Additionally, the DMC-1 comes with a dedicated remote control, as well as integration options for control systems, making it easy to include in any smart home setup.

In conclusion, the Emotiva DMC-1 is a versatile and powerful audio control processor that promises to enhance any home theater system. With its advanced audio processing capabilities, high-quality DAC technology, automated room calibration, extensive connectivity options, and user-friendly interface, the DMC-1 stands out as a top choice for those seeking exceptional audio performance. Whether you're a movie buff, a music lover, or a gaming enthusiast, the DMC-1 delivers a level of sound quality and precision that is sure to impress.
Top Page Image Contents