Emotiva manual DMC-1 Rear Panel Layout, Audio/Video Inputs Audio/Video Outputs, Component Video

Page 17

DMC-1 Rear Panel Layout

1

2

3

4

5

6

7

8

 

 

 

 

10

9

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1 Audio/Video Inputs

2 Audio/Video Outputs

These Audio, Component Video,

MAIN: connects to the inputs of a TV

Composite-Video and S-Video inputs

monitor, where the video of any selected

connect to the outputs of your audio

input and the On Screen Display (OSD) can

video components. When these inputs

be viewed. The audio connections allow

are selected, the audio will be heard in

you to listen to any selected audio source

your system and the video will be seen

through your TV’s speakers.

on the TV screen. VID2 can be used for a

VCR: connects to the inputs of a VCR to

second VCR.

allow recording.

 

 

 

 

 

3 Component Video In

VID2/MON2: connects to the input of a

These inputs connect to the component-

second VCR for recording, or to a second TV.

video outputs of your DVD, SAT or other

When configured in the OSD for“VID2,”this

video source (VID1) if they have this

output is muted whenever the VID2 input

advanced capability. When these inputs

is selected. This prevents feedback; also

are selected, the DMC-1 will automatically

there is no OSD then on this output. When

route any video signals going into these

configured for“MON2,”the output is always

jacks to the component video outputs.

active, the same as the Main output.

Note that component video provides the

Note: Analog audio signals are present at

best picture compared to composite or

these L and R outputs even if a digital input

S-Video. The DMC-1 can also route HDTV

has been selected. The output is a 2 channel

signals.

down mix if the digital source has more than

 

 

 

 

 

 

 

 

 

 

2 channels.

4Component Video Out

If your TV Monitor has component video inputs, connect them to these outputs. If you select DVD, SAT or VID1, then any video signals going to the component inputs, will pass through to your TV monitor. The DMC-1 can also up convert any Composite Video or S-Video signals from the other inputs to Component Video.

Page 17

Image 17
Contents USER’S Guide Page Table of Contents FM Antenna AM Antenna Audio InputsAudio Outputs Digital Inputs Digital OutputMain Zone Menu PartyZone 2 Menu Subwoofer ModeVideo Menu Tuner Operation Recording Zone 2 OperationTechnical Specifications Licensing and Trademark Disclosures Safety Precautions Page NEC National Electrical Code Standards Dear Home Entertainment Enthusiast Thank You for your DMC-1 PurchaseRecording the Serial Number Unpacking the DMC-1DMC-1 Serial Number Place of Purchase Date of PurchaseFeatures of the DMC-1 A/V Controller Power Button DMC-1 Front Panel FeaturesImportant Please note the DMC-1 Is operated from the DMC-1 remoteDigi Dolby DigitalDTS Panel DIM Button Additional Front Panel FeaturesAudio/Video Inputs Audio/Video Outputs DMC-1 Rear Panel LayoutComponent Video Channels10 8-CH Analog Input Ground Screw FM AntennaStereo Outputs Side-Axis OutputsDigital Inputs IEEE-1394 Firewire PortIEC Line Cord Socket Connection Tips for Superior Sound Installation and ConnectionsAC Power Considerations Page What is S-Video? What is Composite Video?What is Component Video? Connection Tips for Video Quality and FlexibilityZone Specific Turn-On Triggers Video Up ConversionVideo Output to the Main Screen and OSD Option Here are two connection optionsConnection Diagrams Page Connecting to the TV or Projector using Component Video Connecting a VCR Analog Audio and Composite Video Connecting a CD Player Analog Audio Connecting a Cassette Tape or DAT Deck Connecting the 8-Channel Analog Inputs Connecting the AM and FM Antennas Connecting an Amplifier Main Zone Connecting an Amplifier Zone Connecting an Amplifier Zone Button Layout Overview of the DMC-1 RemoteButton and Display Light LCD DisplayDevice Buttons ButtonQuick Start Instructions for DMC-1 Setup Quick Start Setup InstructionsAdding Batteries to the Remote Control · Speaker Calibration · Speaker Position · Speaker SizeA cohesive sound field Available and it is highly recommendedDistance menu Feature Number Turning on Zone Operation of the DMC-1 using the RemoteTurning on the Main Zone PRO Learn FAV Macro Punch Recal Erase Edit Light Clone Programming and Configuring Your ComponentsLearn FAV Setup Erase Recal Recall Clone Video Connections On-Screen Display OSD FunctionsOSD Activation DVD Digital 48KOSD Menus How to Navigate the OSD MenusTrim Menu UP Arrow Right Arrow Left Arrow Down ArrowDTS LFE Modes MenuSelected. Also, this input only works in the Main Tone MenuInputs Menu Saving AM/FM Presets Tuner Preset MenuPower Up Source Settings MenusPower Up Volume Mode Power Up VolumeSIDE-AXIS Speakers Speakers Menu SizeMain Speakers Center Speaker Surround SpeakersSurround Back Speakers SubwooferSpeaker Position Distance Use the OSD to navigate to the Speaker Calibration menu Speakers Menu CalibrationCrossover Adjustment Video Default OSD Popup Volume, Source, and ModeVideo Delay VID2/MON2 OUTSoftware Menu Surround Modes for 2 Channel Source Material Special Features of the Emotiva DMC-1Bass Management Jazz Club Dolby PRO Logic II and Dolby PRO LogicParty DTS Surround Modes for Multi-Channel SourcesSource Direct DTS ES Tuning Stations Directly Tuning Stations ManuallySetting the Presets Tuner OperationScanning Presets Recalling a Preset StationRecording Recording to a Tape Player Connections IndicatorsZone 2 Adjust Page Software Upgrades on CD Tips Before You Begin Speaker Placement TipsCenter Speaker Front SpeakersSurround Speakers Side-Axis SpeakersSubwoofer Location Surround Back SpeakersPlay a test Tone or low bass music Place the subwoofer Audio Components Remote Control CodesCable Boxes Satellite/DSS Receivers DVD PlayersLaserdisc Players Televisions VCRs Page No Sound from one or more full range speakers Troubleshooting GuideSee page 50 See pagesSee pages 43 Make sure the disc is not dirty or scratchedZone 2 does not play digital inputs Hum Noises Favorite Settings Log RS-232 Port Rear Main I/R Rear Zone 2 I/R Front Panel I/R Video Settings SelectionPosition DVD SAT VID Tuner Tape PhonoXLR Outputs Technical SpecificationsDTS Disclosure Licensing and Trademark DisclosuresEmotiva Limited WarrantyService Assistance for the DMC-1 Page Franklin, TN

DMC-1 specifications

The Emotiva DMC-1 is an advanced audio control processor designed to elevate your home theater experience to new heights. With a blend of modern technology and a commitment to high-fidelity sound reproduction, the DMC-1 is equipped with features that cater to both audiophiles and casual listeners alike.

One of the standout features of the DMC-1 is its capability to handle 16 channels of audio processing. This allows it to support up to 7.1.8 Dolby Atmos configurations, enabling an immersive sound experience that envelops listeners in their favorite films and music. The DMC-1 also supports DTS:X, providing an additional layer of flexibility for home theater enthusiasts seeking to create a customized audio setup.

At the heart of the DMC-1 is its state-of-the-art DAC (digital-to-analog converter) technology, which ensures that audio signals are converted with pristine accuracy. This includes high-resolution audio formats up to 24-bit/192kHz, allowing users to enjoy their favorite tracks and movies with remarkable clarity and detail.

The DMC-1 also integrates robust room calibration technology, featuring Audyssey MultEQ XT32. This allows the DMC-1 to analyze the acoustics of your room and optimize audio output for the best possible sound experience. This feature is vital for creating balanced audio in spaces that may have irregular dimensions or reflective surfaces.

Another key characteristic of the DMC-1 is its diverse connectivity options. With multiple HDMI inputs and outputs, the processor is well-equipped to handle various sources, from gaming consoles to streaming devices and Blu-ray players. In addition, the DMC-1 supports HDMI 2.0 with HDCP 2.2, providing compatibility with 4K Ultra HD content and HDR formats.

Emotiva's focus on user experience is evident in the DMC-1’s intuitive interface. It includes a full-color LCD screen and customizable on-screen menus, making navigation effortless. Additionally, the DMC-1 comes with a dedicated remote control, as well as integration options for control systems, making it easy to include in any smart home setup.

In conclusion, the Emotiva DMC-1 is a versatile and powerful audio control processor that promises to enhance any home theater system. With its advanced audio processing capabilities, high-quality DAC technology, automated room calibration, extensive connectivity options, and user-friendly interface, the DMC-1 stands out as a top choice for those seeking exceptional audio performance. Whether you're a movie buff, a music lover, or a gaming enthusiast, the DMC-1 delivers a level of sound quality and precision that is sure to impress.