DellTM XFR D630 Fully Rugged Notebook Service Manual
NOTICE: If you are servicing the system board, RF Passthru board or bottom chassis, continue with next steps to remove the PC Card interface board.
10.Remove the screw and then disconnect the interface board connector from the system board. Remove the PC Card interface board.
19.2Installing the PC Card Cage
NOTICE: If you removed the PC Card Reader only, skip to step 2. If you also removed the PC Card interface board, start with step 1.
1.Install the PC Card interface. Connect the PC Card interface board to the system board and secure with the screw to the bottom chassis.
2.Install the PC Card cage. Connect the PC Card Reader cable to the interface board. Install the four
3.Replace the palm rest (see Installing the Palm Rest).
NOTE: Ensure that you reconnect the
4.Replace the display assembly (see Installing the Display Assembly).
5.Replace the keyboard (see Keyboards).
6.Replace the media bay device (see XBay Devices).
7.Replace the hinge cover (see Installing the Hinge Cover).
8.Replace the battery.
20 Speaker
CAUTION: Before working inside your computer, follow the safety instructions in the XFR D630 Product Information Guide and in the XFR D630 User’s Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer).
20.1Removing the Speaker
1.Follow the instructions in Before You Begin.
2.Remove the hinge cover (see Removing the Hinge Cover).
3.Remove any installed media bay device (see XBay Devices).
4.Remove the keyboard (see Keyboards).
5.Remove the display assembly (see Removing the Display Assembly).
Page 92 of 106 | Revision A01 |