DellTM XFR D630 Fully Rugged Notebook Service Manual
1 | modem | 2 | M2 x | 3 | modem cable | |
|
|
|
|
|
| |
4 | system board connector |
|
|
|
| |
|
|
|
| |||
|
|
|
| |||
|
|
|
|
|
| |
| NOTICE: Do not disconnect the modem cable from the system board. | |||||
9. Disconnect the modem cable from the modem.
16.2Installing the Modem
NOTE: When replacing the modem, it is easier to connect the modem cable to the modem before you press the modem into the system board connector.
1.Connect the modem cable to the modem.
2.Connect the modem to the connector on the system board.
3.Install the M2 x 3mm screw that attaches the modem to the system board.
4.Replace the palm rest (see Installing the Palm Rest).
5.Replace the display assembly (see Installing the Display Assembly).
6.Replace the keyboard (see Keyboards).
7.Replace the hinge cover (see Installing the Hinge Cover).
17 Processor Thermal-Cooling Assembly
Page 85 of 106 | Revision A01 |