DellTM XFR D630 Fully Rugged Notebook Service Manual
| 1 | display bezel overlay |
| 2 | display bezel | 3 | display panel | |||
|
| |||||||||
|
|
|
|
|
|
|
|
|
|
|
| 4 | display back cover |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| PART NUMBER |
| SCREW TYPE | QUANTITY |
|
|
| |||
| 18428 | CSK SCREW M2 X | 2 |
|
|
| ||||
| 18417 | PAN HEAD SCREW M2 X | 7 |
|
|
| ||||
| 18114 | SHOULDER SCREW M2.5 | 6 |
|
|
| ||||
4.Remove the fifteen (15) screws that secure the bezel:
•Two - SCR,M2X8,PHH,MSCR,ZPS,XFR
•Seven - SCR,M2X12,PHH,MSCR,ZPS,XFR
•Six - SCR,M2.5X10,PHH,MSCR,SHLDR,XFR
NOTICE: Carefully separate the bezel from the display back cover to avoid damage to the bezel.
5.Starting from the outside edges of the bezel, use your fingers to gently pry the bezel upward from the display panel. Release the sides of the bezel next; if necessary, use a plastic scribe to carefully release the corners of the bezel from the display panel.
10.4Installing the Display Bezel
NOTICE: To avoid damaging the computer when replacing the display bezel, ensure that the bezel edges line up with those on the display back cover, and snap into place around the entire perimeter of the display back cover.
1.Align the display bezel, and install the fifteen (15) screws that secure the bezel:
•Two - SCR,M2X8,PHH,MSCR,ZPS,XFR
•Seven - SCR,M2X12,PHH,MSCR,ZPS,XFR
•Six - SCR,M2.5X10,PHH,MSCR,SHLDR,XFR
2.Install the new bezel overlay.
a.Remove the backing material from the bezel overlay.
b.Initially position the overlay around the top two Display bumpers.
c.Press evenly and firmly to apply the overlay.
3.Install the 2 screw covers to the bottom center screws.
4.Remove the 8 screw covers from the original bezel overlay and apply to the new overlay. Each screw cover location on the overlay is marked by a white dot.
10.5Removing the Display Panel
Page 63 of 106 | Revision A01 |