Compex Technologies NetPassage 15B manual For Microsoft Windows 2000/XP

Page 16

Chapter 2 Getting Started

Press on the Obtain an IP address automatically radio button and press the OK button.

Figure 2.2.1-2

Network Configuration

Window

4.Press the OK button again to close the network configuration window. The Microsoft Windows will then prompt you to restart the computer. Press the OK button to reboot.

When the Microsoft Windows restarts, NetPassage 15B will assign an IP address, Subnet Mask and Gateway information to the computer.

For Microsoft Windows 2000/XP

1.Open the Control Panel from the Start menu

2.Double-click on the Network Connections icon.

3.Double-click on the network icon that you will be using to connect to NetPassage 15B for configuration, the network configuration window shall be displayed as shown in Figure 2.2.1-3.

Please ensure that the correct network adapter is selected.

Figure 2.2.1-3

Network Configuration

Window

4.Double-click on the TCP/IP connection, the TCP/IP configuration window shall be displayed, as shown in Figure 2.2.1-4.

9

Image 16

Contents Page Disclaimer Trademark InformationYour Feedback FCC Notice Declaration of ConformityCompex, Inc Technical Support InformationReadyLINK Networktechnology GmbH About this Document ConventionsTable of Contents NetPassage 15B’s System Tools Key Features Product OverviewIntroduction Broadband Internet SharingIntegrated 4-port 10/100Mbps Switch Time-based Access ManagementWeb-based Configuration Interface Parallel BroadbandPackage Contents Panel Views & Descriptions Panel ViewsIndex Indicator Description Panel DescriptionTechnical Data NetPassage 15B SpecificationsHardware Setup Getting Started192.168.168.1 TCP/IP Configuration of the ComputersFor Microsoft Windows 95/98/ME For Microsoft Windows 2000/XP Configuring your Computer with Static IP Address Netmask 255.255.255.0192.168.168.X Subnet Mask 255.255.255.0 Gateway 192.168.168.1 DNS ServerSubnet Mask of 192.168.168.X and 255.255.255.0 respectively DNS Configuration Window Connecting to the Configuration Interface \WINDOWS\PINGProxy Settings Connecting to Web-based Configuration InterfaceCommand Menu Configuration WindowConnecting to NetPassage 15B’s Command Console via Telnet Telnet Command Console\WINDOWS\TELNET Command Console Login Configuring NetPassage 15B Setting up your LANConfiguring IP Addressing IP AddressAdvanced Option for Dhcp Server To reserve IP addresses for specific computersTo view the IP released by the Dhcp Server 5 titled Australia Big Pond Cable Internet 4 titled Singapore Singtel Magix SuperSurfCable Internet with Dynamic IP Assignment Cloning MAC Address to NetPassage 15B Cable Internet with Static IP Assignment Static IP Configuration Password Service NameIdle Timeout UsernameSingapore SingTel Magix SuperSurf Reconnect Time FactorUse non-standard Pppoe Ethernet typeNetwork Address Translator NAT Australia Big Pond Cable InternetIntroduction to Virtual Servers Virtual Server based on Port ForwardingVirtual Server based on IP Forwarding Defining Virtual Server based on De-Militarized Zone DMZDefining Virtual Server based on Port Forwarding Defining Virtual Server based on IP Forwarding Defining De- Militarized Zone Configuring Routing Protocol Static Routing Dynamic RoutingIP Packet Filtering Internet Application Filtering Activating Remote Router Management Managing NetPassage 15B from the InternetSelect Single from the drop down menu Http Port Telnet PortImplementing Parallel Broadband NetPassage 15B’s System Tools Setting Router IdentitySynchronizing Router’s Clock with your Computer Upgrading Router’s Firmware Profile Saving, Restore & Reset to Defaults Rebooting NetPassage 15BChanging Administrative Password Appendix a Console Commands Delete CommandEnable Command Disable CommandDisconnect Command Edit CommandAppendix B ISP-Specific Notes Singapore SingNet BroadbandSingapore Pacific Internet Broadband Germany T-DSL & T-OnlineAppendix C Frequently Asked Questions Action Normal Reset Password to Reset to factoryProcedure for resetting password to default