Compex Technologies NetPassage 15B manual Telnet Command Console, Windows\Telnet

Page 22

Chapter 2 Getting Started

Configuration menu

Let’s you set up your NetPassage 15B to connect to

your network easily. Hyperlinks connect you to various menus.

Help menu

Get advice from our friendly technical support engineer.

Command menu

Configuration

Consists of 3 main

window

menus.

 

Edit various

∙

Configuration

attributes of

∙

System Tools

the menu here.

∙Help

 

 

 

 

 

 

 

 

 

 

System Tools

 

 

Message Window

Edit various

 

 

Give you a history of the

internal settings of

 

 

various events. Various

NetPassage 15B.

 

 

configuration messages

 

 

are also displayed here.

 

 

 

 

 

 

 

 

 

Figure 2.3.1-2

NetPassage 15B Configuration Interface

2.3.2TELNET Command Console

Alternatively, the user may connect to the Command Console of NetPassage 15B via a TELNET session to the default IP of NetPassage 15B, 192.168.168.1. This section uses Microsoft TELNET command for instruction. You may use any TELNET client.

Connecting to NetPassage 15B’s Command Console via TELNET

1.Connect to NetPassage 15B’s Command Console with the following command at DOS prompt. The TELNET application will then be launched and connect to NetPassage 15B.

C:\WINDOWS\TELNET 192.168.168.1

2.At the login prompt, type in “password” (default password) and press the <ENTER> key, as shown in Figure 2.3.2-1. You will then login to the Command Console of NetPassage 15B.

15

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Page Disclaimer Trademark InformationYour Feedback FCC Notice Declaration of ConformityCompex, Inc Technical Support InformationReadyLINK Networktechnology GmbH About this Document ConventionsTable of Contents NetPassage 15B’s System Tools Introduction Key FeaturesProduct Overview Broadband Internet SharingWeb-based Configuration Interface Integrated 4-port 10/100Mbps SwitchTime-based Access Management Parallel BroadbandPackage Contents Panel Views & Descriptions Panel ViewsIndex Indicator Description Panel DescriptionTechnical Data NetPassage 15B SpecificationsHardware Setup Getting Started192.168.168.1 TCP/IP Configuration of the ComputersFor Microsoft Windows 95/98/ME For Microsoft Windows 2000/XP 192.168.168.X Configuring your Computer with Static IP AddressNetmask 255.255.255.0 Subnet Mask 255.255.255.0 Gateway 192.168.168.1 DNS ServerSubnet Mask of 192.168.168.X and 255.255.255.0 respectively DNS Configuration Window Connecting to the Configuration Interface \WINDOWS\PINGCommand Menu Proxy SettingsConnecting to Web-based Configuration Interface Configuration WindowConnecting to NetPassage 15B’s Command Console via Telnet Telnet Command Console\WINDOWS\TELNET Command Console Login Configuring IP Addressing Configuring NetPassage 15BSetting up your LAN IP AddressAdvanced Option for Dhcp Server To reserve IP addresses for specific computersTo view the IP released by the Dhcp Server 5 titled Australia Big Pond Cable Internet 4 titled Singapore Singtel Magix SuperSurfCable Internet with Dynamic IP Assignment Cloning MAC Address to NetPassage 15B Cable Internet with Static IP Assignment Static IP Configuration Idle Timeout PasswordService Name UsernameUse non-standard Pppoe Singapore SingTel Magix SuperSurfReconnect Time Factor Ethernet typeNetwork Address Translator NAT Australia Big Pond Cable InternetIntroduction to Virtual Servers Virtual Server based on Port ForwardingVirtual Server based on IP Forwarding Defining Virtual Server based on De-Militarized Zone DMZDefining Virtual Server based on Port Forwarding Defining Virtual Server based on IP Forwarding Defining De- Militarized Zone Configuring Routing Protocol Static Routing Dynamic RoutingIP Packet Filtering Internet Application Filtering Activating Remote Router Management Managing NetPassage 15B from the InternetSelect Single from the drop down menu Http Port Telnet PortImplementing Parallel Broadband NetPassage 15B’s System Tools Setting Router IdentitySynchronizing Router’s Clock with your Computer Upgrading Router’s Firmware Profile Saving, Restore & Reset to Defaults Rebooting NetPassage 15BChanging Administrative Password Appendix a Console Commands Delete CommandDisconnect Command Enable CommandDisable Command Edit CommandSingapore Pacific Internet Broadband Appendix B ISP-Specific NotesSingapore SingNet Broadband Germany T-DSL & T-OnlineAppendix C Frequently Asked Questions Action Normal Reset Password to Reset to factoryProcedure for resetting password to default
Top Page Image Contents