Compex Technologies NetPassage 15B manual Appendix a Console Commands, Delete Command

Appendix A Console Commands

Appendix A	Console Commands
SHOW Command
SYNTAX		DESCRIPTION
SHOW IP		Display the IP information of the LAN and WAN interface
SHOW IP STAT		Display the statistics of the IP packets
SHOW ICMP STAT		Display the statistics of the ICMP packets
SHOW UDP STAT		Display the statistics of the UDP packets
SHOW TCP STAT		Display the statistics of the TCP packets
SHOW IP ROUTE TABLE		Display the routing table
SHOW IP STATIC NAT TABLE		List defined virtual servers based on IP forwarding
SHOW PORT STATIC NAT TABLE		List defined virtual servers based on port forwarding
SHOW SYSTEM		Display the system information
SHOW RIP		Display the status of the dynamic routing protocol
SHOW GATEWAY		Display the gateway IP address of the WAN interface
SHOW DHCP		Display the DHCP information
SHOW DHCP RESERVE		Display the DHCP reservations
SHOW DHCP LEASE		Display the leased IP information
SHOW ETHERNET ADDRESS		Display the MAC address of the LAN & WAN interface
SHOW TELNET SESSION		Display the source IP of the open TELNET console session
SHOW TIME		Display current router’s time
SHOW NAT STAT		Display the status of the NAT
SHOW ARP TABLE		Display the ARP table in the router
SHOW FILTER		List defined IP packet filtering rules
SET Command
SYNTAX		DESCRIPTION
SET IP LAN <IP ADDR> <NETMASK>		Set the IP address of the LAN interface
SET IP WAN <IP ADDR> <NETMASK>		Set the IP address of the WAN interface
SET GATEWAY <IP ADDR>		Set the gateway IP address of the WAN interface
SET SYSTEM NAME <STRING>		Set the router’s identity
SET SYSTEM CONTACT <STRING>		Specify the contact person for this router
SET SYSTEM LOCATION <STRING>		Specify the location of this router
SET PASSWORD		Changing the administrative password
SET TIMEZONE <GMT DIFF>		Set the timezone based on GMT time difference
SET TIME <HH:MM:SS>		Set the router’s time
SET DATE <MM/DD/YYYY>		Set the router’s date
SET DHCP SERVER		Configure the DHCP server
SET PROMPT “<STRING>”		Set the text appear at the command console
SET WAN TYPE		Select the WAN type
SET FILTER MODE		Set the option on IP packet filtering rules
PING Command
SYNTAX		DESCRIPTION
PING <IP ADDR>		Ping a host by its IP address
DELETE Command
SYNTAX		DESCRIPTION
DELETE ARP <IP ADDR>		Remove an IP address from the ARP table
DELETE IP ROUTE <DES> <GATEWAY>		Remove an entry from the routing table
DELETE IP STATIC NAT <INDEX>		Delete an entry from the list of defined virtual server based on IP

43