Compex Technologies NetPassage 15B manual Profile Saving, Restore & Reset to Defaults

Page 48

Chapter 3 Configuring NetPassage 15B

CAUTION

Make sure that the power supply is not cut off during the firmware upgrade process. If the NetPassage 15B looses power supply during firmware upgrade process, the firmware will be corrupted and the NetPassage 15B will no longer be functional.

3.8.4Profile Saving, Restore & Reset to Defaults

You may save the configuration profile of your NetPassage 15B onto the hard disk of your managing computer and restore this profile in a later time. You may also reset the configuration of your NetPassage 15B to factory defaults.

1.Click on the Save or Reset Settings URL from the Command Menu and the following page will be displayed, as shown in Figure 3.8.4-1.

Figure 3.8.4-1

Saving, Restore and Reset

Profile

2.Press the Save button if you wish to save the configuration profile into NetPassage 15B’s flash ROM. Press the Backup button if you want to save the configuration profile onto the hard disk. If you want to restore a profile, press the Browse button to select the file from the hard disk and press the Restore button. If you wish to reset your NetPassage 15B back to factory defaults, press the Clear and Reset button.

CAUTION

Pressing the Clear and Reset button will discard all the configuration you have saved to NetPassage 15B’s flash ROM.

3.8.5Rebooting NetPassage 15B

You may reboot your NetPassage 15B manually from the web-based management interface. Please always ensure that the changes have been saved before rebooting the router.

41

Image 48

Contents Page Trademark Information DisclaimerYour Feedback FCC Notice Declaration of ConformityTechnical Support Information Compex, IncReadyLINK Networktechnology GmbH About this Document ConventionsTable of Contents NetPassage 15B’s System Tools Key Features Product OverviewIntroduction Broadband Internet SharingIntegrated 4-port 10/100Mbps Switch Time-based Access ManagementWeb-based Configuration Interface Parallel BroadbandPackage Contents Panel Views & Descriptions Panel ViewsIndex Indicator Description Panel DescriptionTechnical Data NetPassage 15B SpecificationsHardware Setup Getting StartedTCP/IP Configuration of the Computers 192.168.168.1For Microsoft Windows 95/98/ME For Microsoft Windows 2000/XP Configuring your Computer with Static IP Address Netmask 255.255.255.0192.168.168.X Subnet Mask 255.255.255.0 Gateway 192.168.168.1 DNS ServerSubnet Mask of 192.168.168.X and 255.255.255.0 respectively DNS Configuration Window Connecting to the Configuration Interface \WINDOWS\PINGProxy Settings Connecting to Web-based Configuration InterfaceCommand Menu Configuration WindowTelnet Command Console Connecting to NetPassage 15B’s Command Console via Telnet\WINDOWS\TELNET Command Console Login Configuring NetPassage 15B Setting up your LANConfiguring IP Addressing IP AddressAdvanced Option for Dhcp Server To reserve IP addresses for specific computersTo view the IP released by the Dhcp Server 4 titled Singapore Singtel Magix SuperSurf 5 titled Australia Big Pond Cable InternetCable Internet with Dynamic IP Assignment Cloning MAC Address to NetPassage 15B Cable Internet with Static IP Assignment Static IP Configuration Password Service NameIdle Timeout UsernameSingapore SingTel Magix SuperSurf Reconnect Time FactorUse non-standard Pppoe Ethernet typeNetwork Address Translator NAT Australia Big Pond Cable InternetIntroduction to Virtual Servers Virtual Server based on Port ForwardingVirtual Server based on IP Forwarding Defining Virtual Server based on De-Militarized Zone DMZDefining Virtual Server based on Port Forwarding Defining Virtual Server based on IP Forwarding Defining De- Militarized Zone Configuring Routing Protocol Static Routing Dynamic RoutingIP Packet Filtering Internet Application Filtering Managing NetPassage 15B from the Internet Activating Remote Router ManagementSelect Single from the drop down menu Http Port Telnet PortImplementing Parallel Broadband Setting Router Identity NetPassage 15B’s System ToolsSynchronizing Router’s Clock with your Computer Upgrading Router’s Firmware Profile Saving, Restore & Reset to Defaults Rebooting NetPassage 15BChanging Administrative Password Appendix a Console Commands Delete CommandEnable Command Disable CommandDisconnect Command Edit CommandAppendix B ISP-Specific Notes Singapore SingNet BroadbandSingapore Pacific Internet Broadband Germany T-DSL & T-OnlineAppendix C Frequently Asked Questions Action Normal Reset Password to Reset to factoryProcedure for resetting password to default