Compex Technologies NetPassage 15B manual Singapore SingTel Magix SuperSurf, Reconnect Time Factor

Page 32

Chapter 3 Configuring NetPassage 15B

Reconnect Time Factor	This field is associated with Always-Onoption. This field
	allows you to specify a Reconnect Time Factor (RTF). The
	default value is 30 seconds. If Always-Onoption is
	selected with an RTF of 30 seconds, your NetPassage 15B
	will stay connected to the ISP even when there is no
	Internet traffic present. If disconnected by the ISP,
	NetPassage 15B will perform a delay for a random period
	between 1 to RTF seconds (for RTF value of 30, the
	random period is drawn between 1 to 30 seconds), and
	reconnect to the ISP.
Use non-standard PPPOE	Certain Ethernet-based ADSL modem requires non-
Ethernet type	standard PPP over Ethernet for authentication. If you are
	uncertain about this, DO NOT “check” this box.

5.Press the Save button followed by the Reboot button to complete the configuration process.

3.2.4Singapore SingTel Magix SuperSurf

You should use this WAN type only if you are a subscriber of SingTel Magix SuperSurf in Singapore. If you have subscribed to SingNet Broadband or Pacific Internet Broadband, please go to Section 3.2.3 titled ADSL Internet using PPP over Ethernet (PPPoE).

1.Click on the WAN Setup URL from the Command Menu and the WAN configuration page will be displayed, as shown in Figure 3.2.2-1.

2.Press the Change button and the list of supported WAN type will be displayed, as shown in Figure 3.2.1-2.

3.Check the Singapore ADSL (Ethernet 512K) radio button and press the Save button. The configuration page for SingTel Magix SuperSurf will be displayed, as shown in Figure 3.2.4-1.

Figure 3.2.4-1

SingTel Magix SuperSurf

Configuration Page

25

Image 32

Contents Page Your Feedback Trademark InformationDisclaimer FCC Notice Declaration of ConformityReadyLINK Networktechnology GmbH Technical Support InformationCompex, Inc About this Document ConventionsTable of Contents NetPassage 15B’s System Tools Key Features Product OverviewIntroduction Broadband Internet SharingIntegrated 4-port 10/100Mbps Switch Time-based Access ManagementWeb-based Configuration Interface Parallel BroadbandPackage Contents Panel Views & Descriptions Panel ViewsIndex Indicator Description Panel DescriptionTechnical Data NetPassage 15B SpecificationsHardware Setup Getting StartedFor Microsoft Windows 95/98/ME TCP/IP Configuration of the Computers192.168.168.1 For Microsoft Windows 2000/XP Configuring your Computer with Static IP Address Netmask 255.255.255.0192.168.168.X Subnet Mask 255.255.255.0 Gateway 192.168.168.1 DNS ServerSubnet Mask of 192.168.168.X and 255.255.255.0 respectively DNS Configuration Window Connecting to the Configuration Interface \WINDOWS\PINGProxy Settings Connecting to Web-based Configuration InterfaceCommand Menu Configuration Window\WINDOWS\TELNET Telnet Command ConsoleConnecting to NetPassage 15B’s Command Console via Telnet Command Console Login Configuring NetPassage 15B Setting up your LANConfiguring IP Addressing IP AddressAdvanced Option for Dhcp Server To reserve IP addresses for specific computersTo view the IP released by the Dhcp Server Cable Internet with Dynamic IP Assignment 4 titled Singapore Singtel Magix SuperSurf5 titled Australia Big Pond Cable Internet Cloning MAC Address to NetPassage 15B Cable Internet with Static IP Assignment Static IP Configuration Password Service NameIdle Timeout UsernameSingapore SingTel Magix SuperSurf Reconnect Time FactorUse non-standard Pppoe Ethernet typeNetwork Address Translator NAT Australia Big Pond Cable InternetIntroduction to Virtual Servers Virtual Server based on Port ForwardingVirtual Server based on IP Forwarding Defining Virtual Server based on De-Militarized Zone DMZDefining Virtual Server based on Port Forwarding Defining Virtual Server based on IP Forwarding Defining De- Militarized Zone Configuring Routing Protocol Static Routing Dynamic RoutingIP Packet Filtering Internet Application Filtering Select Single from the drop down menu Managing NetPassage 15B from the InternetActivating Remote Router Management Http Port Telnet PortImplementing Parallel Broadband Synchronizing Router’s Clock with your Computer Setting Router IdentityNetPassage 15B’s System Tools Upgrading Router’s Firmware Profile Saving, Restore & Reset to Defaults Rebooting NetPassage 15BChanging Administrative Password Appendix a Console Commands Delete CommandEnable Command Disable CommandDisconnect Command Edit CommandAppendix B ISP-Specific Notes Singapore SingNet BroadbandSingapore Pacific Internet Broadband Germany T-DSL & T-OnlineAppendix C Frequently Asked Questions Action Normal Reset Password to Reset to factoryProcedure for resetting password to default