Chapter 2 Getting Started
2.3.1Web-based Configuration Interface
To connect to the
Web Browser: | Netscape Navigator 4.0 & above |
JAVA: | or Internet Explorer 4.0 & above |
Enabled | |
Proxy Settings: | Cleared |
Proxy Auto Discovery: | Disabled |
Connecting to Web-based Configuration Interface
1.Launch the Internet Explorer or Netscape Navigator
2.Open the URL using the default IP of NetPassage 15B. Eg. Type in http://192.168.168.1 in the Address field of Internet Explorer.
3.The logon page will then be displayed, as shown in Figure
Figure
Logon Page
NOTE
If the proxy settings of your web browser is not cleared, you will not be able to connect to NetPassage 15B’s
Once log on, you will see a web page consist of three frames, the Command Menu, Configuration Window and Message Window, as shown in Figure
Command Menu | Enable the user to select feature to be configured |
Configuration Window | Enable the user to configure the parameters associated |
| with the selected feature |
Message Window | Display the message (if any) associated with the |
| configuration process |
14