Compex Technologies NetPassage 15B manual Defining De- Militarized Zone

Page 38

Chapter 3 Configuring NetPassage 15B

Figure 3.3.3-3

Defining New Virtual

Server based on IP

Forwarding

4.Enter the Public IP Address and the Private IP Address which it maps to. Please ensure that you have subscribed to this Public IP Address.

5.Press the Add button to add this new Virtual Server into the list.

6.Click on the Save or Reset Settings URL from the Command Menu and press the Save button.

3.3.4Defining De- Militarized Zone

To define a DMZ host:

7.Click on the NAT URL from the Command Menu and the NAT configuration page will be displayed, as shown in Figure 3.3.4-1.

Figure 3.3.4-1

NAT Configuration Page

8.Press the DMZ button and the DMZ Host Definition Window will be displayed, as shown in Figure 3.3.4-2.

Figure 3.3.4-2

Configuring DMZ

9.Enter the IP address of the your designated computer and press the Apply button.

10.Save the configuration profile.

NOTE

To disable DMZ, please enter the IP address as 0.0.0.0.

31

Image 38
Contents Page Your Feedback Trademark InformationDisclaimer FCC Notice Declaration of ConformityReadyLINK Networktechnology GmbH Technical Support InformationCompex, Inc About this Document ConventionsTable of Contents NetPassage 15B’s System Tools Introduction Key FeaturesProduct Overview Broadband Internet SharingWeb-based Configuration Interface Integrated 4-port 10/100Mbps SwitchTime-based Access Management Parallel BroadbandPackage Contents Panel Views & Descriptions Panel ViewsIndex Indicator Description Panel DescriptionTechnical Data NetPassage 15B SpecificationsHardware Setup Getting StartedFor Microsoft Windows 95/98/ME TCP/IP Configuration of the Computers192.168.168.1 For Microsoft Windows 2000/XP 192.168.168.X Configuring your Computer with Static IP AddressNetmask 255.255.255.0 Subnet Mask 255.255.255.0 Gateway 192.168.168.1 DNS ServerSubnet Mask of 192.168.168.X and 255.255.255.0 respectively DNS Configuration Window Connecting to the Configuration Interface \WINDOWS\PINGCommand Menu Proxy SettingsConnecting to Web-based Configuration Interface Configuration Window\WINDOWS\TELNET Telnet Command ConsoleConnecting to NetPassage 15B’s Command Console via Telnet Command Console Login Configuring IP Addressing Configuring NetPassage 15BSetting up your LAN IP AddressAdvanced Option for Dhcp Server To reserve IP addresses for specific computersTo view the IP released by the Dhcp Server Cable Internet with Dynamic IP Assignment 4 titled Singapore Singtel Magix SuperSurf5 titled Australia Big Pond Cable Internet Cloning MAC Address to NetPassage 15B Cable Internet with Static IP Assignment Static IP Configuration Idle Timeout PasswordService Name UsernameUse non-standard Pppoe Singapore SingTel Magix SuperSurfReconnect Time Factor Ethernet typeNetwork Address Translator NAT Australia Big Pond Cable InternetIntroduction to Virtual Servers Virtual Server based on Port ForwardingVirtual Server based on IP Forwarding Defining Virtual Server based on De-Militarized Zone DMZDefining Virtual Server based on Port Forwarding Defining Virtual Server based on IP Forwarding Defining De- Militarized Zone Configuring Routing Protocol Static Routing Dynamic RoutingIP Packet Filtering Internet Application Filtering Select Single from the drop down menu Managing NetPassage 15B from the InternetActivating Remote Router Management Http Port Telnet PortImplementing Parallel Broadband Synchronizing Router’s Clock with your Computer Setting Router IdentityNetPassage 15B’s System Tools Upgrading Router’s Firmware Profile Saving, Restore & Reset to Defaults Rebooting NetPassage 15BChanging Administrative Password Appendix a Console Commands Delete CommandDisconnect Command Enable CommandDisable Command Edit CommandSingapore Pacific Internet Broadband Appendix B ISP-Specific NotesSingapore SingNet Broadband Germany T-DSL & T-OnlineAppendix C Frequently Asked Questions Action Normal Reset Password to Reset to factoryProcedure for resetting password to default