Compex Technologies NetPassage 15B manual Network Address Translator NAT

Chapter 3 Configuring NetPassage 15B

4.Enter the Username, Password and Idling Timeout value to the fields and press the Save button.

5.Press the Reboot button to complete the configuration process.

3.2.5Australia Big Pond Cable Internet

You should select this WAN type only if you are a subscriber of Big Pond Cable Internet in Australia. If you have subscribed to OPTUS in Australia, please go to

Section 3.2.1 titled Cable Internet with Dynamic IP Assignment. Please note that OPTUS requires a DHCP Client ID before releasing an IP address to you.

1.Click on the WAN Setup URL from the Command Menu and the WAN configuration page will be displayed, as shown in Figure 3.2.2-1.

2.Press the Change button and the list of supported WAN type will be displayed, as shown in Figure 3.2.1-2.

3.Check the Australia BPA Cable radio button and press the Save button. The configuration page for Big Pond Australia will be displayed, as shown in Figure 3.2.5-1.

Figure 3.2.5-1

Big Pond Australia

Configuration Page

4.Enter the Username, Password and Idling Timeout to the fields and press the Save button.

5.Press the Reboot button to complete the configuration process.

3.3Network Address Translator (NAT)

Compex NetPassage 15B has been designed with a Network Address Translator (NAT) that supports Port Address Translation (PAT), sharing a single public IP address with multiple computers in the private network by using different TCP ports for different computers. By default, the NAT is enabled.

26