Chatsworth Products RIM-600 user manual IP Schedule screen

Page 57

Chapter 2: Software

Schedule: Click this button to bring up the Edit Schedule screen. This screen allows you to set times when the IP Alarm is enabled or disabled. The blue line indicates days/times when the channel is enabled.

Figure 27: IP Schedule screen

The schedule example above enables the IP alarm 24 hours a day, including holidays.

Editing the schedule:

•Click on the All button in the top left corner of the grid to enable/disable the entire week.

•Click on the day buttons down the left side of the grid to enable/disable entire days

•Click on the hour buttons across the top of the grid to enable/disable entire hours

•Drag the mouse over portions of the grid to enable/disable specific hours/days

Timeout: If the monitored IP address does not respond within this period of time, then the ping is considered a failure. If the number of consecutive failures exceeds the number of Retries then a Ping Timeout alarm is tripped.

Retries: This is the number of times the monitored IP address is pinged after a failure, before a Ping Timeout alarm is tripped.

Alarm Class: Click the drop-down arrow and select the appropriate class for this type of alarm. If you prefer you can create your own classes on the Class Setup screen to group certain types of alarms.

Custom Voice: Click the drop-down arrow and select the custom voice message you would like assigned to this IP Alarm. Voice messages can be recorded on your PC and uploaded into the RIM-600 on the Voice screen.

Reset Time: This is the time allowed for an acknowledged alarm’s fault condition to be corrected before the RIM-600 resets (reactivates) the alarm and begins the message delivery process all over again. The minimum reset time is 30 minutes.

Alarm on Return-to-Normal: When this feature is enabled, the unit will send a message (or messages) when an IP device goes from a Ping Timeout state to a Responding state. The person who acknowledged the alarm—in addition to all Inform Only contacts in the alarm class—will receive the Return-to-Normal message.

SNMP Trap Level: When sending alarm messages via SNMP, this sets the priority of the SNMP trap. The choices are Major or Minor.

Note: See the previous section, “Alarm Response via the PowerGate, PowerGate2, or Camera” for information on responses to alarms via PowerGates or Cameras.

57

Page 56 Page 58
Image 57
Page 56 Page 58
Contents Version Remote Infrastructure Management RIM-600Page Important Safety Instructions Chatsworth Products, Inc Industrial Drive New Bern, NC Fax FCC RequirementsGeneral Requirements for all Automatic Dialers Host only Telephone Consumer Protection Act Host onlyRIM-600 Manual Year Limited Warranty Chatsworth Products, Inc Industrial Drive New Bern, NC Fax Table of Contents RIM-600 Quick Start Guide RIM-600 SoftwareConfiguring Hosts and Nodes Setting Up An Enterprise Software InstallationConfiguring Templates Configuring IP Alarms IP Alarm Setup Alarm LogicHoliday Setup Alarm Message Pop-Ups Configuring User Profiles and Contacts Adding a ProfileDeleting a Profile Contacts Adding Contacts WebSnmp Simple Network Management Protocol GraphsCommunicating with your RIM-600 PowerGate2 PowerGateRIM-600 PowerGate Specifications Operating Specifications PowerGate2 Setup via the RIM-600 ConsoleView SoftwareRIM-600 Sensors Room Humidity Sensor External Power SensorRoom Humidity Sensor with display Water Detection SensorDry Contact Bridge Door Switch60051-001 4-20mA Bridge Passive Infrared Detection SensorTechnical Support for the RIM-600 Sensors Smoke Detector SensorFeatures IntroductionTechnical Support About This Manual Host Installation and ConfigurationPhysical Description Front Panel LayoutSensor Inputs AC Power and Battery LEDs InstallationON/OFF Switch Rear PanelRack Mount Installation Wall Mount InstallationOperating Environment Tabletop Installation Power On Self Test PostConnecting Sensors Network Configuration Enterprise Status Unit Type IP Return to main menu Local Configuration Definitions Replacing the Battery Battery MaintenanceRIM-600 Manual Operating Specifications RIM-600 Host SpecificationsCommunications Specifications Environmental MonitoringMicrophone Node Installation & ConfigurationBattery Compartment Battery replacement in the Node unit Battery ReplacementWall-mounted Node Unit RIM-600 Node Unit Local Configuration Definitions Node Specifications Install Software and Log In to Host Install Units and Configure Network SettingsDefault Username and Password RIM-600 Quick Start GuideConfigure the Unit Properties for the Host and Nodes Configure Input TemplatesConnect Environmental Sensors to Host and Nodes Configure User Profiles and Contacts Configure IP AlarmsRecord and Assign Voice Messages Software Installation Software Installation and Hardware RequirementsInstalling from the CD Hardware and Software RequirementsConfiguring Hosts and Nodes Setting Up An EnterpriseStarting the RIM-600 ConsoleView Software Adding a Host Connecting to a HostDeleting a Host Adding an Enterprise GroupSystem Info tab Setting the Unit Properties for the RIM-600 HostAdding a Node Clock settings tabChanging Host Network Settings using ConsoleView Setting the Unit Properties for the NodeDeleting a Node Node Properties Setup Tab Changing Node Network SettingsChannel Setup Configuring Environmental InputsEditing the schedule Channel Setup screenAlarm Class dropdown menu Camera Snapshots on Alarm Alarm Response via the PowerGate, PowerGate2, or CameraRealtime Strip Chart High Sound AlarmsTrouble Alarms Environmental Input Alarm LogicConfiguring Templates Removing/Changing a SensorTemplate Types Configuring IP Alarms IP Alarm SetupProgramming Alarm Parameters IP Schedule screen Alarm Logic IP Alarm Flowchart Removing an IP AlarmSetup Classes Input/Alarm ClassesConfiguring User Profiles and Contacts Configuring User ProfilesAdding a Profile Permissions Master System Site Admin UserSelecting Classes ClassesContacts Deleting a ProfileAdding Contacts Voice Calls Numeric Pager CallsAlphanumeric Pager Calls Fax Calls Alarm Delivery OptionsMail ScheduleSaving and Loading Programming ReconnectingRecording and Uploading Voice Messages Recording Voice MessagesCustom Voice Manager Holiday List Holiday SetupAlarm Message Pop-Ups Activating Alarm Pop-UpsEnabling Custom Pop-Up Messages Setting Pop-Up Text Location Audible Alarm NotificationEditing Pop-Up Custom Message Smtp Error messages Mail Setup and Two-Way E-Mail CommandsRequesting a Status Report Two Way E-MailRequesting an IP Ping Requesting a Trace RouteRequesting a PowerGate Outlet Command Requesting a Picture from a CameraRequesting Help Panasonic Configuring a Video CameraAssociating Cameras Graphs WebRemote Web Updating the WebViewing the Remote Web HistoryHistory Options Datalog HistoryViewing History History QuickViewQuerying the History Database with HistoryView Printing Data Exporting Data GraphingCopying to the Clipboard Manually Forcing History DownloadsDeleting Data ArchivingManual Datalog Download in progress Updating Firmware

RIM-600 specifications

Chatsworth Products (CPI) has established a reputation for delivering innovative solutions in the field of infrastructure technology. One of their standout products is the RIM-600, a versatile and feature-rich telecommunications rack designed to accommodate various IT equipment needs in data centers and network environments.

The RIM-600 boasts a robust construction, featuring a sturdy steel framework that enhances durability and provides optimal protection for sensitive electronic components. This product is engineered to support a range of IT gear, including servers, network switches, and patch panels, making it an ideal choice for organizations looking to maximize their data center efficiency.

One of the key features of the RIM-600 is its impressive cooling capability. The rack is designed with advanced airflow management in mind. It includes adjustable vertical cable management options that help maintain proper airflow while minimizing cable congestion. This design is crucial for preventing overheating and ensuring reliable performance for all housed equipment, thereby extending the lifespan of critical hardware.

The RIM-600 also incorporates tool-less assembly, simplifying the installation and setup process. This feature is particularly advantageous for IT professionals who require a rapid deployment of systems without cumbersome installation procedures. Furthermore, the rack’s modular design allows for easy customization and scalability, accommodating varying configurations as business needs evolve.

Moreover, the RIM-600 ensures enhanced accessibility with removable side panels and rear doors. This facilitates hassle-free cable access and promotes efficient maintenance practices. The inclusion of integrated grounding provisions ensures that all equipment remains secure and compliant with safety standards.

In terms of scalability, the RIM-600 can support up to 3,000 pounds of equipment, offering ample weight capacity for heavy-duty installations. Its compatibility with popular accessories, including shelving, power distribution units, and cooling solutions, further enhances the rack's utility and flexibility in diverse operational environments.

In summary, the Chatsworth Products RIM-600 is an exceptional telecommunications rack combining durability, cooling efficiency, and ease of installation. Its innovative design and thoughtful features make it a top choice for organizations looking to elevate their data center infrastructure while ensuring equipment protection and optimal performance.
Top Page Image Contents