15HP Size C and Larger AC Controls
Dual Expansion Board Installation (Continued)
12.When complete, install the control cover using the four (4) Phillips head screws (1/4 turn). (On floor mounted G size enclosures, close the enclosure door).
13.Restore all power sources to the control.
14.Restore drive operation.
Figure 3-6 Dual Expansion Board Installation
#6 Screw
Group 2 Expansion Board
Short Aluminum | Female Connector |
| |
Standoff |
|
| Male Connector |
| Group 1 Expansion Board |
| Control Board Mounting Plate |
Installation