Baldor EXB009A01 manual Section General Information, Introduction, Group 2 Board Name

Section 1

General Information

Introduction

The Baldor controls represent the latest technology in microprocessor based motor controls. In addition to the user programmable parameters available in every control, many different expansion boards are available from Baldor to further customize the control to most any application.

Expansion boards are categorized by compatibility into two groups: Group 1 and Group 2, see Table 1-1. A board from either group may be used alone in a control. If two boards are to be used, one board must be from Group 1 and the other from Group 2.

Note: Using two Group 1 or two Group 2 boards in the same control is not allowed.

Table 1-1 Group 1 and Group 2 Board Categories

Group 1 Board Name	Catalog No.	Baldor
		Manual No.
Isolated Input Expansion Board	EXB003A01	MN1314
Master Pulse Reference/	EXB005A01	MN1312
Isolated Pulse Follower
DC Tachometer Interface	EXB006A01	MN1311
Isolated Encoder Expansion	EXB008A01	MN1317
Board
Resolver to Digital Interface	EXB009A01	MN1313
Group 2 Board Name
RS-232 Serial Communication	EXB001A01	MN1310
RS-422/RS-485 High Speed	EXB002A01	MN1310
Serial Communication
Four Output Relays/3-15 PSI	EXB004A01	MN1315
Pneumatic Expansion Board
High Resolution Analog I/O	EXB007A02	MN1316
Expansion Board
2 Isolated Analog Output/ 3 Relay	EXB010A01	MN1319
Output Expansion Board

General Information 1-1