National Products manual DS90C3202 3.3V 8 MHz to 135 MHz Dual FPD-Link Receiver

Page 22

DS90C3202 3.3V 8 MHz to 135 MHz Dual FPD-Link Receiver

Physical Dimensions inches (millimeters) unless otherwise noted

128-Pin TQFP Package

Order Number DS90C3202VS

NS Package Number VJX128A

National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.

For the most current product information visit us at www.national.com.

LIFE SUPPORT POLICY

NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein:

1. Life support devices or systems are devices or systems

2. A critical component is any component of a life support

which, (a) are intended for surgical implant into the body, or

device or system whose failure to perform can be reasonably

(b) support or sustain life, and whose failure to perform when

expected to cause the failure of the life support device or

properly used in accordance with instructions for use

system, or to affect its safety or effectiveness.

provided in the labeling, can be reasonably expected to result

 

in a significant injury to the user.

 

 

 

BANNED SUBSTANCE COMPLIANCE

National Semiconductor follows the provisions of the Product Stewardship Guide for Customers (CSP-9-111C2) and Banned Substances and Materials of Interest Specification (CSP-9-111S2) for regulatory environmental compliance. Details may be found at: www.national.com/quality/green.

Lead free products are RoHS compliant.

National Semiconductor

National Semiconductor

National Semiconductor

National Semiconductor

Americas Customer

Europe Customer Support Center

Asia Pacific Customer

Japan Customer Support Center

Support Center

 

Fax: +49 (0) 180-530 85 86

Support Center

Fax: 81-3-5639-7507

Email: new.feedback@nsc.com

Email: europe.support@nsc.com

Email: ap.support@nsc.com

Email: jpn.feedback@nsc.com

Tel: 1-800-272-9959

Deutsch

Tel:

+49 (0)

69 9508 6208

 

Tel: 81-3-5639-7560

 

English

Tel:

+44 (0)

870 24 0 2171

 

 

www.national.com

Français Tel:

+33 (0)

1 41 91 8790

 

 

Image 22
Contents Block Diagram FeaturesGeneral Description Typical Application Diagram Functional DescriptionAbsolute Maximum Ratings Note Electrical CharacteristicsLvds Receiver DC Specifications Recommended Operating ConditionsSymbol Parameter Conditions Min Typ Max Units Receiver Supply CurrentReceiver Switching Characteristics Symbol Parameter Condition Min Typ Max Units ReferenceTwo-Wire Serial Communication Interface AC Timing DiagramsWorst Case Test Pattern Receiver Phase Lock Loop Wake-up Time RFB Lvttl Level Programmable Strobe Select Receiver Input Tolerance and Sampling WindowReceiver Rsrc and Rhrc Output Setup/Hold Time PTO Enabled RegisterAddress 29d/1dh bit 21 = 00b20147115 Lvds Input Mapping Receiver Ritol Min and Max Pin Diagram DS90C3202 ReceiverDS90C3202 Pin Descriptions Pin No Pin Name Pin Type DescriptionDS90C3202 Pin Descriptions RXOA4 Lvttl O/P Two-Wire Serial Communication Interface Description Communicating with the DS90C3202 Control RegistersBit # Description Default Value DS90C3202 Two-Wire Serial Interface Register TableReset AddressBit # Description DS90C3202 Two-Wire Serial Interface Register Table DS90C3202 3.3V 8 MHz to 135 MHz Dual FPD-Link Receiver