National Products DS90C3202 manual Absolute Maximum Ratings Note, Recommended Operating Conditions

Page 3

Absolute Maximum Ratings (Note 1)

If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications.

Supply Voltage (VDD)	−0.3V to +4V
LVCMOS/LVTTL Input
Voltage	−0.3V to (VDD + 0.3V)
LVCMOS/LVTTL Output
Voltage	−0.3V to (VDD + 0.3V)
LVDS Receiver Input Voltage	−0.3V to (VDD + 0.3V)
Junction Temperature	+150˚C
Storage Temperature	−65˚C to +150˚C
Lead Temperature
(Soldering, 10 sec.)	+260˚C
Maximum Package Power Dissipation Capacity @ 25˚C
128 TQFP Package:	1.4W

Package Derating:	25.6mW/˚C above +25˚C
ESD Rating:
(HBM, 1.5kΩ, 100pF)	> 2 kV
(EIAJ, 0Ω, 200pF)	> 200 V

Recommended Operating

Conditions

	Min	Nom	Max	Units
Supply Voltage (VDD)	3.15	3.3	3.6	V
Operating Free Air
Temperature (TA)	0	+25	+70	˚C
Supply Noise Voltage (VP-P)			±100 mVp-p
Receiver Input Range	0		VDD	V
Input Clock Frequency (f)	8		135	MHz

DS90C3202

Electrical Characteristics

Over recommended operating supply and temperature ranges unless otherwise specified.

Symbol	Parameter		Conditions		Min	Typ	Max	Units

CMOS/TTL DC SPECIFICATIONS (Rx outputs, control inputs and outputs)

VIH	High Level Input Voltage				2.0		VDD	V
VIL	Low Level Input Voltage				0		0.8	V
VOH	High Level Output Voltage	Rx clock out		IOH = −4 mA	2.4			V
		Rx data out		IOH = −2 mA
VOL	Low Level Output Voltage	Rx clock out		IOL = +4 mA			0.4	V
		Rx data out		IOL = +2 mA
VCL	Input Clamp Voltage	ICL = −18 mA				−0.8	−1.5	V
IIN	Input Current	VIN = VDD					+10	µA
		VIN = 0V			−10			µA
IOS	Output Short Circuit Current	VOUT = 0V					−120	mA
LVDS RECEIVER DC SPECIFICATIONS

VTH	Differential Input High Threshold	VCM = +1.2V					+100	mV
VTL	Differential Input Low Threshold				−100			mV
VIN	Input Voltage Range				0		VDD	V
	(Single-ended)

VID	Differential Input Voltage				0.200		0.600	V
VCM	Differential Common Mode				0.2	1.2	VDD−0.1	V
	Voltage

IIN	Input Current	VIN = +2.4V, VDD = 3.6V					±10	µA
		VIN = 0V, VDD = 3.6V					±10	µA

3	www.national.com

Image 3

Contents Features Block DiagramGeneral Description Functional Description Typical Application DiagramRecommended Operating Conditions Electrical CharacteristicsLvds Receiver DC Specifications Absolute Maximum Ratings NoteReceiver Supply Current Symbol Parameter Conditions Min Typ Max UnitsSymbol Parameter Condition Min Typ Max Units Reference Receiver Switching CharacteristicsAC Timing Diagrams Two-Wire Serial Communication InterfaceWorst Case Test Pattern Receiver Phase Lock Loop Wake-up Time Receiver Input Tolerance and Sampling Window RFB Lvttl Level Programmable Strobe SelectRegisterAddress 29d/1dh bit 21 = 00b Receiver Rsrc and Rhrc Output Setup/Hold Time PTO Enabled20147115 Lvds Input Mapping Receiver Ritol Min and Max DS90C3202 Receiver Pin DiagramPin No Pin Name Pin Type Description DS90C3202 Pin DescriptionsDS90C3202 Pin Descriptions RXOA4 Lvttl O/P Communicating with the DS90C3202 Control Registers Two-Wire Serial Communication Interface DescriptionAddress DS90C3202 Two-Wire Serial Interface Register TableReset Bit # Description Default ValueBit # Description DS90C3202 Two-Wire Serial Interface Register Table DS90C3202 3.3V 8 MHz to 135 MHz Dual FPD-Link Receiver