Netac Tech T600 manual Operating Mode Overview, AP Router Mode

Netac AirTrack T600 Mini Wireless Router

3 Operating Mode Overview

This section provides an overview of T600 operating modes.

NOTE: The AirTrack T610 Wireless Broadband Router in the following pictures is router product of Netac. You can choose the product of the same kind from the other companies to build net.

3.1 AP Router Mode

The default operating mode is AP Router Mode. When the system is restored to the default factory settings, the operating mode also reverts to AP Router Mode. In AP Router Mode, T600 works as a standard AP, where wireless clients connected to the AP can then connect to other wireless clients or to the wired network. For example, when traveling to a hotel that has high-speed Internet access, or at home, the user can connect to the Internet through the AP, which is connected to an Ethernet cable in the room (Figure 3.1).

Family's AP Router Mode

Traveler's AP Router Mode

Figure 3.1 AP Router Mode

T600 AP can act as a DHCP server, support IP address conversion.

Section 5.1 "AP Router Mode Setup Page" describes the configuration details for this mode.

5