Netac Tech T600 manual PMP Mode Setup, 10 P2P Mode Advanced Settings

Page 27

Netac AirTrack T600 Mini Wireless Router

	Figure 5.10 P2P Mode - Advanced Settings Page
	Table 5.13 P2P Mode - Advanced Settings

Field	Description

RTS Threshold	RTS threshold.

DTIM Interval	DTIM interval.

Protection Mode	Allows user to force 802.11g Protection (RTS/CTS) mode off.

Transmit Rate	Select transmit rate: Auto or a fixed rate.

Preamble Type	Select: Short preamble, Long preamble or Auto.

5.4 PMP Mode Setup Page

To configure T600 in PMP Mode, select PMP in the Mode Selection page (Figure 5.1), click Apply to reboot T600, and then click the PMP: Setup button. Figure 5.11 and Table 5.14 describe the PMP Mode setup options.

22

Image 27

Contents Netac AirTrack T600 Mini Wireless Router Remarks Radio Frequency Interference Remarks Table of Contents Appendix B Contact Netac Appendix C Glossary Product function ChecklistIntroduction WelcomeAppearances AppearanceUpside Quick Start Default Factory SettingsAP Router Mode Operating Mode OverviewRepeater Mode Repeater Mode Parent/Child MAC Addresses Point-to-Point P2P ModeClient Mode Point-to-Multipoint PMP ModeClient in Infrastructure Mode WEP WPA-PSK Wireless Security SupportAP Router Mode Setup Mode SelectionField Description WEP Configuration AP Router Mode Security ConfigurationAP Router Mode WPA Configuration AP Router Mode Advanced SettingsConnect Repeater AP Router Mode Access Filter MAC Filter List SetupAP Router Mode Access Filter Repeater Mode SetupRepeater Mode Setup Repeater Mode Setup Options Repeater Mode Security Configuration Repeater Mode Access Filter MAC Filter List Setup Repeater Mode Advanced SettingsP2P Mode Setup 11 P2P Mode Setup Options P2P Mode Setup2 P2P Mode Advanced Settings 1 P2P Mode Security Configuration10 P2P Mode Advanced Settings PMP Mode Setup11 PMP Mode Setup 14 PMP Mode Setup Options PMP Mode Security Configuration12 PMP Mode Advanced Settings 16 PMP Mode Advanced Settings PMP Mode Advanced SettingsStation Mode Select 802.11b or 802.11g mode Client Mode Setup14 Client Mode Site Survey 18 Client Mode Site Survey Client Mode Site Survey15 and .19 detail the WEP configuration page for Client Mode Client Mode Security Configuration16 and .20 detail the WPA configuration for Client Mode Status AP Router Mode StatusRepeater Mode Status P2P Mode Status Client Mode Status AP Router Mode Admin AdminReconfirm Password fields and click Apply Same subnet LANNetac AirTrack T600 Mini Wireless Router Access to the device that provides the IP address Same subnet WAN OtherForward DMZ LED SpecificationsMy question is not included in FAQ, what shall I do? Appendix a FAQAppendix B Contact Netac 802.11b Appendix C GlossaryCCK LAN Wlan