Netac Tech T600 manual Repeater Mode Advanced Settings

Page 24

Netac AirTrack T600 Mini Wireless Router

Data Encryption	TKIP data encryption.

Passphrase	WPA key.

Group Re-Key Time	Group Re-Key interval (seconds).

5.2.2 Repeater Mode - Advanced Settings

Access the Advanced Settings page by clicking the Advance Settings: Setup button in the Repeater Mode setup page (Figure 5.7). The Advanced Settings page allows the user to configure advanced Radio settings for the Repeater. Figure 5.8 and Table 5.9 detail the options.

	Figure 5.8 Repeater Mode - Advanced Settings Page
	Table 5.9 Repeater Mode - Advanced Settings

Field	Description

Beacon Interval	Beacon interval (milliseconds).

RTS Threshold	RTS threshold.

DTIM Interval	DTIM interval.

Protection Mode	Allows user to force 802.11g Protection (RTS/CTS) mode off.

Transmit Rate	Select transmit rate: Auto (Default) or a fixed rate.

Preamble Type	Select: Short preamble, Long preamble or Auto.

5.2.3 Repeater Mode - Access Filter (MAC Filter List) Setup

Click The Access Filter: Setup button in the Repeater Mode setup page (Figure 5.7) to access the Access Filter page. The Access Filter page allows the user to configure the Repeater to allow or deny association to itself based on the client's MAC address. Up to 32 MAC addresses can be added to the list.

19

Image 24

Contents Netac AirTrack T600 Mini Wireless Router Remarks Radio Frequency Interference Remarks Table of Contents Appendix B Contact Netac Appendix C Glossary Checklist IntroductionWelcome Product functionAppearance AppearancesUpside Default Factory Settings Quick StartOperating Mode Overview AP Router ModeRepeater Mode Point-to-Point P2P Mode Repeater Mode Parent/Child MAC AddressesPoint-to-Multipoint PMP Mode Client ModeClient in Infrastructure Mode Wireless Security Support WEP WPA-PSKMode Selection AP Router Mode SetupField Description AP Router Mode Security Configuration WEP ConfigurationAP Router Mode Advanced Settings AP Router Mode WPA ConfigurationAP Router Mode Access Filter MAC Filter List Setup Connect RepeaterRepeater Mode Setup AP Router Mode Access FilterRepeater Mode Setup Repeater Mode Setup Options Repeater Mode Security Configuration Repeater Mode Advanced Settings Repeater Mode Access Filter MAC Filter List SetupP2P Mode Setup P2P Mode Setup 11 P2P Mode Setup Options1 P2P Mode Security Configuration 2 P2P Mode Advanced SettingsPMP Mode Setup 10 P2P Mode Advanced SettingsPMP Mode Security Configuration 11 PMP Mode Setup 14 PMP Mode Setup OptionsPMP Mode Advanced Settings 12 PMP Mode Advanced Settings 16 PMP Mode Advanced SettingsClient Mode Setup Station Mode Select 802.11b or 802.11g modeClient Mode Site Survey 14 Client Mode Site Survey 18 Client Mode Site SurveyClient Mode Security Configuration 15 and .19 detail the WEP configuration page for Client Mode16 and .20 detail the WPA configuration for Client Mode AP Router Mode Status StatusRepeater Mode Status P2P Mode Status Client Mode Status Admin AP Router Mode AdminReconfirm Password fields and click Apply LAN Same subnetNetac AirTrack T600 Mini Wireless Router Access to the device that provides the IP address Same subnet Other WANForward DMZ Specifications LEDAppendix a FAQ My question is not included in FAQ, what shall I do?Appendix B Contact Netac Appendix C Glossary 802.11bCCK LAN Wlan