Netac AirTrack T600 Mini Wireless Router
|
|
|
| Figure 5.7 Repeater Mode Setup Page |
|
|
|
|
| Table 5.6 Repeater Mode Setup Options |
|
|
|
|
|
|
|
| Field |
|
| Description |
|
|
|
|
|
|
|
| Parent MAC Address |
|
| MAC address of Parent AP/Router/Repeater to which this Repeater is connected. |
|
|
|
|
|
|
|
| Child MAC Address |
|
| MAC address of the Child Repeater connected to this Repeater. |
|
|
|
|
|
|
|
| Mode |
|
| Select 802.11b, 802.11g or Mixed mode. |
|
|
|
|
|
|
|
| Broadcast SSID |
|
| Disable/Enable the SSID broadcast feature. |
|
|
|
|
|
|
|
| Domain |
|
| Select domain. Different domain use different channel. |
|
|
|
|
|
|
|
| Channel |
|
| Select the RF channel. Default: Channel 6. |
|
|
|
|
|
|
|
| Security |
|
| Select Disable (Default), WEP or WPA. Select one, and click the Setup button to |
|
|
|
| enter the WEP configuration page (Figure 5.3) or WPA (Figure 5.4). |
| |
|
|
|
|
| |
|
|
|
|
|
|
| Advanced Settings |
|
| Click Setup to configure Advanced Settings (Figure 5.8). |
|
|
|
|
|
|
|
| Access Filter |
|
| Click Setup to configure the Access Filter (Figure 5.6). |
|
|
|
|
|
|
|
NOTE: Under Repeater Mode, you must make sure the related configuration (such as Security, Channel, etc.) of Parent AP and Child AP/Router are consistent with T600 in order to communicate with each other.
17