Netac Tech T600 manual Appendix a FAQ, My question is not included in FAQ, what shall I do?

Page 48

Netac AirTrack T600 Mini Wireless Router

Appendix A: FAQ

1.Why the wirele ss network card used AES encryption cannot be connected when I use WPA-PSK security mode？

Answer: T600 support TKIP encryption only and cannot support AES encryption When use WPA-PSK

security mode.

2.When I upgrade T600 firmware through wireless network card, T600 has no response, what shall I do?

Answer: It is suggested that you upgrade the firmware through wire network.

3.I cannot log on to T600's web page when I modify password as null, why?

Answer: The password of T600 cannot be set as null.

4.Why AP still can access to T600 after T600 filter the AP address in Repeater Mode?

Answer: In Repeater Mode, T600 filter child's MAC address only, it cannot filter parent node's MAC address.

5.Why I cannot configure for Client Mode? How can I configure the parameters of Client Mode?

Answer: When T600 running in AP Router Mode, Repeater Mode, P2P Mode and PMP Mode, you cannot configure Client Mode, you can configure the parameters of Client Mode just When T600 running in Client Mode. To configure T600 in Client Mode, select Client in the Mode Selection page (Figure 5.1), click Apply to reboot T600, and then click the Client: Setup button.

6.My question is not included in "FAQ", what shall I do?

Answer: Please E-mail to support@netac.com, Netac customer service engineer will reply you in time.

43

Image 48

Contents Netac AirTrack T600 Mini Wireless Router Remarks Radio Frequency Interference Remarks Table of Contents Appendix B Contact Netac Appendix C Glossary Checklist IntroductionWelcome Product functionAppearance AppearancesUpside Default Factory Settings Quick StartOperating Mode Overview AP Router ModeRepeater Mode Point-to-Point P2P Mode Repeater Mode Parent/Child MAC AddressesPoint-to-Multipoint PMP Mode Client ModeClient in Infrastructure Mode Wireless Security Support WEP WPA-PSKMode Selection AP Router Mode SetupField Description AP Router Mode Security Configuration WEP ConfigurationAP Router Mode Advanced Settings AP Router Mode WPA ConfigurationAP Router Mode Access Filter MAC Filter List Setup Connect RepeaterRepeater Mode Setup AP Router Mode Access FilterRepeater Mode Setup Repeater Mode Setup Options Repeater Mode Security Configuration Repeater Mode Advanced Settings Repeater Mode Access Filter MAC Filter List SetupP2P Mode Setup P2P Mode Setup 11 P2P Mode Setup Options1 P2P Mode Security Configuration 2 P2P Mode Advanced SettingsPMP Mode Setup 10 P2P Mode Advanced SettingsPMP Mode Security Configuration 11 PMP Mode Setup 14 PMP Mode Setup OptionsPMP Mode Advanced Settings 12 PMP Mode Advanced Settings 16 PMP Mode Advanced SettingsClient Mode Setup Station Mode Select 802.11b or 802.11g modeClient Mode Site Survey 14 Client Mode Site Survey 18 Client Mode Site SurveyClient Mode Security Configuration 15 and .19 detail the WEP configuration page for Client Mode16 and .20 detail the WPA configuration for Client Mode AP Router Mode Status StatusRepeater Mode Status P2P Mode Status Client Mode Status Admin AP Router Mode AdminReconfirm Password fields and click Apply LAN Same subnetNetac AirTrack T600 Mini Wireless Router Access to the device that provides the IP address Same subnet Other WANForward DMZ Specifications LEDAppendix a FAQ My question is not included in FAQ, what shall I do?Appendix B Contact Netac Appendix C Glossary 802.11bCCK LAN Wlan