Netac Tech T600 manual AP Router Mode Access Filter MAC Filter List Setup, Connect Repeater

Page 20

Netac AirTrack T600 Mini Wireless Router

	Table 5.4 AP Router Mode - Advanced Settings

Field	Description

Beacon Interval	Beacon interval (milliseconds).

RTS Threshold	RTS threshold.

DTIM Interval	DTIM interval.

Protection Mode	Allows user to force 802.11g Protection (RTS/CTS) mode off.

Transmit Rate	Select transmit rate: Auto (Default) or a fixed rate.

Preamble Type	Select: Short preamble, Long preamble or Auto.

Connect Repeater	Disable/Enable the use of a Repeater.

Repeater MAC Address	MAC address for each Repeater. Up to two Repeaters can be connected.

5.1.2.1 Connect Repeater

Up to two Repeaters can be connected. If a Repeater is used along with the Access Point, the settings steps are the following:

1.Go to the Advanced Settings Page.

2.Select Enable for the Connect Repeater field.

3.Enter the MAC address for each Repeater in the Repeater MAC Address field.

5.1.3 AP Router Mode - Access Filter (MAC Filter List) Setup

Click the Access Filter: Setup button in the AP Router Mode setup page (Figure 5.2) to access the Access Filter page. The Access Filter page allows the user to configure T600 to allow or deny association to itself based on the MAC address of the client. Up to 32 MAC addresses can be added to the list. Figure 5.6 and Table 5.5 detail the options.

15

Image 20

Contents Netac AirTrack T600 Mini Wireless Router Remarks Radio Frequency Interference Remarks Table of Contents Appendix B Contact Netac Appendix C Glossary Checklist IntroductionWelcome Product functionAppearance AppearancesUpside Default Factory Settings Quick StartOperating Mode Overview AP Router ModeRepeater Mode Point-to-Point P2P Mode Repeater Mode Parent/Child MAC AddressesPoint-to-Multipoint PMP Mode Client ModeClient in Infrastructure Mode Wireless Security Support WEP WPA-PSKMode Selection AP Router Mode Setup Field Description AP Router Mode Security Configuration WEP ConfigurationAP Router Mode Advanced Settings AP Router Mode WPA ConfigurationAP Router Mode Access Filter MAC Filter List Setup Connect RepeaterRepeater Mode Setup AP Router Mode Access FilterRepeater Mode Setup Repeater Mode Setup Options Repeater Mode Security Configuration Repeater Mode Advanced Settings Repeater Mode Access Filter MAC Filter List SetupP2P Mode Setup P2P Mode Setup 11 P2P Mode Setup Options1 P2P Mode Security Configuration 2 P2P Mode Advanced SettingsPMP Mode Setup 10 P2P Mode Advanced SettingsPMP Mode Security Configuration 11 PMP Mode Setup 14 PMP Mode Setup OptionsPMP Mode Advanced Settings 12 PMP Mode Advanced Settings 16 PMP Mode Advanced SettingsClient Mode Setup Station Mode Select 802.11b or 802.11g modeClient Mode Site Survey 14 Client Mode Site Survey 18 Client Mode Site SurveyClient Mode Security Configuration 15 and .19 detail the WEP configuration page for Client Mode16 and .20 detail the WPA configuration for Client Mode AP Router Mode Status StatusRepeater Mode Status P2P Mode Status Client Mode Status Admin AP Router Mode AdminReconfirm Password fields and click Apply LAN Same subnetNetac AirTrack T600 Mini Wireless Router Access to the device that provides the IP address Same subnet Other WANForward DMZ Specifications LEDAppendix a FAQ My question is not included in FAQ, what shall I do?Appendix B Contact Netac Appendix C Glossary 802.11bCCK LAN Wlan