Netac Tech T600 manual Access to the device that provides the IP address

Page 42

Netac AirTrack T600 Mini Wireless Router

Figure 8.3 Client Mode - LAN Page

CAUTION: Selecting the Automatic IP option is not advised unless the user has direct access to the device that provides the IP address. Be sure to know how to distinguish the IP address of T600 from that of a connected device before selecting this option. This is important regardless of T600 operating mode.

 

 

 

 

Table 8.2 Client Mode - LAN Page Options

 

 

 

 

 

 

 

 

Field

 

 

Description

 

 

 

 

 

 

 

 

 

 

 

Allows the user to assign a friendly device name to access T600. For example in

 

 

 

 

 

Figure 8.3, both http://AirTrackT600N1 and http://192.168.1.1 can be used to open

 

 

Device Name

 

 

the configuration webpages of the device.

 

 

 

 

 

NOTE: To configure T600, the user must access T600 from a PC that is on the

 

 

 

 

 

same subnet.

 

 

 

 

 

 

 

 

 

 

 

Configure the device to use an automatic (DHCP) IP address.

 

 

Automatic IP

 

 

NOTE: Selecting the Automatic IP option is not advised unless the user has direct

 

 

 

 

 

access to the device that provides the IP address.

 

 

 

 

 

 

 

 

Fixed IP

 

 

Default option. Values of the IP Address, Subnet Mask, and Gateway fields must

 

 

 

 

be specified.

 

 

 

 

 

 

 

 

 

 

 

 

 

IP Address

 

 

Set the IP address of T600.

 

 

 

 

 

 

 

37

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Netac AirTrack T600 Mini Wireless Router Remarks Radio Frequency Interference Remarks Table of Contents Appendix B Contact Netac Appendix C Glossary Welcome ChecklistIntroduction Product functionAppearance AppearancesUpside Default Factory Settings Quick StartOperating Mode Overview AP Router ModeRepeater Mode Point-to-Point P2P Mode Repeater Mode Parent/Child MAC AddressesPoint-to-Multipoint PMP Mode Client ModeClient in Infrastructure Mode Wireless Security Support WEP WPA-PSKMode Selection AP Router Mode SetupField Description AP Router Mode Security Configuration WEP ConfigurationAP Router Mode Advanced Settings AP Router Mode WPA ConfigurationAP Router Mode Access Filter MAC Filter List Setup Connect RepeaterRepeater Mode Setup AP Router Mode Access FilterRepeater Mode Setup Repeater Mode Setup Options Repeater Mode Security Configuration Repeater Mode Advanced Settings Repeater Mode Access Filter MAC Filter List SetupP2P Mode Setup P2P Mode Setup 11 P2P Mode Setup Options1 P2P Mode Security Configuration 2 P2P Mode Advanced SettingsPMP Mode Setup 10 P2P Mode Advanced SettingsPMP Mode Security Configuration 11 PMP Mode Setup 14 PMP Mode Setup OptionsPMP Mode Advanced Settings 12 PMP Mode Advanced Settings 16 PMP Mode Advanced SettingsClient Mode Setup Station Mode Select 802.11b or 802.11g modeClient Mode Site Survey 14 Client Mode Site Survey 18 Client Mode Site SurveyClient Mode Security Configuration 15 and .19 detail the WEP configuration page for Client Mode16 and .20 detail the WPA configuration for Client Mode AP Router Mode Status StatusRepeater Mode Status P2P Mode Status Client Mode Status Admin AP Router Mode AdminReconfirm Password fields and click Apply LAN Same subnetNetac AirTrack T600 Mini Wireless Router Access to the device that provides the IP address Same subnet Other WANForward DMZ Specifications LEDAppendix a FAQ My question is not included in FAQ, what shall I do?Appendix B Contact Netac Appendix C Glossary 802.11bCCK LAN Wlan
Top Page Image Contents