Netac Tech T600 manual Client Mode Site Survey 18 Client Mode Site Survey

Netac AirTrack T600 Mini Wireless Router

	Enable MAC Cloning Mode. Clones all the MAC addresses of devices connected
MAC Cloning Mode	to the Ethernet (wired) port to a single MAC address sent out wirelessly to an AP or
	Repeater.
SSID	Wireless Network Name. You can enter it directly in this field or click the Site
	Survey button to select one from a list of available networks. (Figure 5.14).
Operation Mode	Select Ad-Hoc or Infrastructure mode.
Domain	Select domain (Ad-Hoc network only). Different domain use different channel.
Channel	Select channel (Ad-Hoc network only). Default: Channel 6.
Security	Select Disable (Default), WEP or WPA. Select one, and click the Setup button to
	enter the WEP configure page (Figure 5.3) or WPA (Figure 5.4).
Preamble Type	Select Short or Long preamble.
Transmit Rate	Select transmit rate: fixed rate or Auto.

5.5.1 Client Mode - Site Survey

Clicking the Site Survey button brings up the Site Survey page, which displays the available Access Points and Ad -Hoc networks in the neighborhood. The user can select the AP or Ad-Hoc network to join. Figure 5.14 and Table 5.18 describe the options.

	Figure 5.14 Client Mode - Site Survey Page
	Table 5.18 Client Mode - Site Survey
Field	Description
Site Survey table	List the available Access Points and Ad -Hoc networks. To select a wireless
	network to join, click its radio button.
Scan	Start the Site Survey Scan process.

26