Netac Tech T600 manual Other, Wan

Page 44

Netac AirTrack T600 Mini Wireless Router

9 Other Page

9.1 WAN Page

Only AP Router Mode has WAN page, shown in Figure 9.1. The WAN page allows user to set Protocol, IP address, and so on.

Table 9.1 details the options.

				Figure 9.1 AP Router Mode - WAN Page
				Table 9.1 AP Router Mode - WAN Page Options

	Field			Description

	Protocol			Setting the method to obtain IP address for WAN connection. Select DHCP, Static
	Protocol			or PPPoE.
				or PPPoE.

				Set the IP address of T600.
	IP Address			NOTE: To configure T600, the user must access T600 from a PC that is on the
				same subnet.

	Subnet Mask			Allow the user to specify a subnet mask.

	Gateway			Allow the user to specify a gateway.

39

Image 44

Contents Netac AirTrack T600 Mini Wireless Router Remarks Radio Frequency Interference Remarks Table of Contents Appendix B Contact Netac Appendix C Glossary Checklist IntroductionWelcome Product functionAppearance AppearancesUpside Default Factory Settings Quick StartOperating Mode Overview AP Router ModeRepeater Mode Point-to-Point P2P Mode Repeater Mode Parent/Child MAC AddressesPoint-to-Multipoint PMP Mode Client ModeClient in Infrastructure Mode Wireless Security Support WEP WPA-PSKMode Selection AP Router Mode SetupField Description AP Router Mode Security Configuration WEP ConfigurationAP Router Mode Advanced Settings AP Router Mode WPA ConfigurationAP Router Mode Access Filter MAC Filter List Setup Connect RepeaterRepeater Mode Setup AP Router Mode Access FilterRepeater Mode Setup Repeater Mode Setup Options Repeater Mode Security Configuration Repeater Mode Advanced Settings Repeater Mode Access Filter MAC Filter List SetupP2P Mode Setup P2P Mode Setup 11 P2P Mode Setup Options1 P2P Mode Security Configuration 2 P2P Mode Advanced SettingsPMP Mode Setup 10 P2P Mode Advanced SettingsPMP Mode Security Configuration 11 PMP Mode Setup 14 PMP Mode Setup OptionsPMP Mode Advanced Settings 12 PMP Mode Advanced Settings 16 PMP Mode Advanced SettingsClient Mode Setup Station Mode Select 802.11b or 802.11g modeClient Mode Site Survey 14 Client Mode Site Survey 18 Client Mode Site SurveyClient Mode Security Configuration 15 and .19 detail the WEP configuration page for Client Mode16 and .20 detail the WPA configuration for Client Mode AP Router Mode Status StatusRepeater Mode Status P2P Mode Status Client Mode Status Admin AP Router Mode AdminReconfirm Password fields and click Apply LAN Same subnetNetac AirTrack T600 Mini Wireless Router Access to the device that provides the IP address Same subnet Other WANForward DMZ Specifications LEDAppendix a FAQ My question is not included in FAQ, what shall I do?Appendix B Contact Netac Appendix C Glossary 802.11bCCK LAN Wlan