Netac Tech T600 manual Radio Frequency Interference Remarks

Page 3

Radio Frequency Interference Remarks

This equipment has passed the test, and affirmed that it compatible to constrain B type digital equipment in section 15 of FCC. This constraint is mainly used to protect the home -keeping equipment, avoid to be interfered banefully. This equipment can produce, use, and radiate radio frequency energy. If you don't install and use according to the descriptive manual, the equipment may interfere the wireless communication banefully.

If this equipment interfere the wireless communication and TV receiving device banefully (can tested by turning on/off the equipment's power), users can try to correct interference referring to the following method:

1Adjust or resettle receive antenna.

2Enlarge the distance between equipment and receiver.

3Connect the equipment to the outlet different to the receiver.

4Consult dealer or experienced wireless/TV technology engineer.

The radiant output power is lower than the exposed constraint of FCC wireless radio frequency brings. Nevertheless, it should notice that reduce the latent radiance to human body when you use equipment. Please keep more than 20cm space between equipment and human body when you use and install it.

Under some cases or environments, the use of this equipment may be bounded, if there is no clear designation to allow to use Wireless Local Area Internet equipment, please ask whether it can be used or not. Such as:

1On the airplane.

2The environment easy to burn and burst.

3At some particular situation (such as airport, hospital, chemical/petrol/gas industrial place, private house, and so on).

Image 3

Contents Netac AirTrack T600 Mini Wireless Router Remarks Radio Frequency Interference Remarks Table of Contents Appendix B Contact Netac Appendix C Glossary Product function ChecklistIntroduction WelcomeAppearances AppearanceUpside Quick Start Default Factory SettingsAP Router Mode Operating Mode OverviewRepeater Mode Repeater Mode Parent/Child MAC Addresses Point-to-Point P2P ModeClient Mode Point-to-Multipoint PMP ModeClient in Infrastructure Mode WEP WPA-PSK Wireless Security SupportAP Router Mode Setup Mode SelectionField Description WEP Configuration AP Router Mode Security ConfigurationAP Router Mode WPA Configuration AP Router Mode Advanced SettingsConnect Repeater AP Router Mode Access Filter MAC Filter List SetupAP Router Mode Access Filter Repeater Mode SetupRepeater Mode Setup Repeater Mode Setup Options Repeater Mode Security Configuration Repeater Mode Access Filter MAC Filter List Setup Repeater Mode Advanced SettingsP2P Mode Setup 11 P2P Mode Setup Options P2P Mode Setup2 P2P Mode Advanced Settings 1 P2P Mode Security Configuration10 P2P Mode Advanced Settings PMP Mode Setup11 PMP Mode Setup 14 PMP Mode Setup Options PMP Mode Security Configuration12 PMP Mode Advanced Settings 16 PMP Mode Advanced Settings PMP Mode Advanced SettingsStation Mode Select 802.11b or 802.11g mode Client Mode Setup14 Client Mode Site Survey 18 Client Mode Site Survey Client Mode Site Survey15 and .19 detail the WEP configuration page for Client Mode Client Mode Security Configuration16 and .20 detail the WPA configuration for Client Mode Status AP Router Mode StatusRepeater Mode Status P2P Mode Status Client Mode Status AP Router Mode Admin AdminReconfirm Password fields and click Apply Same subnet LANNetac AirTrack T600 Mini Wireless Router Access to the device that provides the IP address Same subnet WAN OtherForward DMZ LED SpecificationsMy question is not included in FAQ, what shall I do? Appendix a FAQAppendix B Contact Netac 802.11b Appendix C GlossaryCCK LAN Wlan