Monarch 9406 manual Supply Type

Page 17

3. Setting Supply Options

3.Press Q to exit to the Setup menu.

NOTE: If you set the Ribbon option to Yes, be sure you install a ribbon before printing.

4.Press Q to exit to the Main Menu.

NOTE: After changing settings in the Setup Menu, always return to the Main Menu before turning your printer off. The printer will not save changes to these menus if you turn it off before returning to the Main Menu.

Supply Type

You can use indexed or non-indexed supplies with the 9406 printer. These supplies are defined as follows:

∙Indexed supplies have marks to indicate the specific length of each label. Supplies with an aperture or black mark are indexed supplies.

∙Non-indexed supplies have no marks to indicate the specific length of the label.

The default setting for Supply Type is Indexed. To change the setting, follow steps listed under "Finding the Supply Options." Then follow the steps below.

1.Press R until you see

 

SUPPLY

 

<

Supply Type

>

2.Press E . You will see the previous setting, for example,

SUPPLY TYPE

<Indexed

Setting Supply Options

3-3

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Operators Handbook Canadian D.O.C. Warning Table of Contents Operators Handbook About This Manual IntroductionMenu Structure Other DocumentationIntroduction New 9406 Features Terms You Should Know Operators Handbook Getting Started Turning the Printer On Using the KeypadSelecting a Function Print ModeStart Up Main Menu Exiting an OptionFinding the Supply Options Setting Supply OptionsRibbon SetupSupply RibbonSupply Type Supply TypeDispense Mode Dispense Mode Continuous Mode FeaturesPrint Position Supply Supply Position Print too far to the left Margin PositionMargin Pos Setting Supply Options Operators Handbook Finding Communication Value Options Setting Communication ValuesBaud Rate Baud RateWord Length Word LengthStopbits Port SettingsStop Bits Parity ParityXON/XOFF DTR Flow ControlFlow Control DTR Reset to Default Values Port Settings Setting the Contrast Contrast Press Q to exit to the Main Menu Finding Default Options Setting DefaultsUSA Monetary SignMonetary Sign Secondary SignSecondary Sign DefaultsDecimal Places Decimal PlacesOperators Handbook Printing Online Print Mode Press E . You will see Index-1 IndexIndex-2 Page U.S.A Canada
Top Page Image Contents