9406 Operator's Handbook
3.Press R or L until you see the option you want. Then press E . The printer calibrates to check the supply.
You will see
| SUPPLY |
|
< | Supply Type | > |
4.Press Q to exit to the Setup menu.
5.Press Q to exit to the Main Menu.
NOTE: After changing settings in the Setup Menu, always return to the Main Menu before turning your printer off. The printer will not save changes to these menus if you turn it off before returning to the Main Menu.
Dispense Mode
You can print supplies in the following modes:
Continuous Prints one batch of labels at a time.
NOTE: The total print range (how close the printer starts from the top of the label) depends on the Dispense Mode you choose. For continuous printing, the total print range is plus or minus 45 mils (1 mil equals 1/1000 of an inch). For