3. Setting Supply Options
The default setting for Dispense Mode is
1.Press R until you see
SUPPLY
< Dispense Mode >
2.Press E . You will see the previous setting, for example
DISPENSE MODE
<
3.Press R or L until you see the option you want. Then press E . You will see
SUPPLY
< Dispense Mode >
4.Press Q to exit to the Setup menu.
5.Press Q to exit to the Main Menu.
NOTE: After changing settings in the Setup Menu, always return to the Main Menu before turning your printer off. The printer will not save changes to these menus if you turn it off before returning to the Main Menu.
Continuous Mode Features
Regardless of the supply type, when you use continuous mode, the printer dispenses all but the last label or tag to the peel bar. The last one goes to the tear bar.
Setting Supply Options