Monarch 9406 manual Parity

Page 31

Setting the Communication Values

3.Press R or L to display the number of stop bits you need, then press E . You will see

PORT SETTINGS

< Stopbits >

4.Press Q to exit to the Setup menu.

5.Press Q to exit to the Main Menu.

NOTE: After changing settings in the Setup Menu, always return to the Main Menu before turning your printer off. The printer will not save changes to these menus if you turn it off before returning to the Main Menu.

Parity

The default setting for Parity is None. To change the setting, follow the steps listed under "Finding Communication Value Options." Then follow the steps below.

1.Press R until you see

PORT SETTINGS

< Parity >

2.Press E . You will see the previous setting, for example,

PARITY

None >

The options for parity are

None

Odd

Even

4-5

Values	Setting Communication

Image 31

Contents Operators Handbook Canadian D.O.C. Warning Table of Contents Operators Handbook About This Manual IntroductionMenu Structure Other DocumentationIntroduction New 9406 Features Terms You Should Know Operators Handbook Getting Started Turning the Printer On Using the KeypadStart Up Print ModeSelecting a Function Main Menu Exiting an OptionFinding the Supply Options Setting Supply OptionsRibbon SetupRibbon SupplySupply Type Supply TypeDispense Mode Dispense Mode Continuous Mode FeaturesPrint Position Supply Supply Position Print too far to the left Margin PositionMargin Pos Setting Supply Options Operators Handbook Finding Communication Value Options Setting Communication ValuesBaud Rate Baud RateWord Length Word LengthStop Bits Port SettingsStopbits Parity ParityFlow Control DTR Flow ControlXON/XOFF DTR Reset to Default Values Port Settings Setting the Contrast Contrast Press Q to exit to the Main Menu Finding Default Options Setting DefaultsUSA Monetary SignMonetary Sign Secondary SignSecondary Sign DefaultsDecimal Places Decimal PlacesOperators Handbook Printing Online Print Mode Press E . You will see Index-1 IndexIndex-2 Page U.S.A Canada