M-S Cash Drawer 7193 manual Select Pitch Column Width, Set Print Mode

Commands 7193 Owner’s Guide

Select Pitch (Column Width)

Selects the character pitch for a print line. It is valid only at the beginning of a line. Standard and compressed pitches cannot be used together on the same line. See “Appendix B” for a description of both pitches.

Hex	Decimal	ASCII	Value of n		Default
1B 16 n	27 22 n	ESC SYN n	0	= Standard Pitch	0
			1	= Compressed Pitch

Set Print Mode

Selects the print mode: standard, compressed, double high, or double wide. See “Appendix B” for a description of standard and compressed character pitches.

Hex	Decimal	ASCII	Value of m	Default
1B 21 m	27 33 m	ESC ! m	See Next Table	0
Value of m
Bit	Function	0		1
Bit 01	Pitch	Standard Pitch2		Compressed Pitch
		44 Col/Line, 15 CPI (Rec)		56 Col/Line, 19 CPI (Rec)
				80 Col/Line, 17.1 CPI (Slip)
		66 Col/Line, 13.9 CPI (Slip)
Bit 4	Double	Canceled		Set
	High3
Bit 5	Double	Canceled		Set
	Wide

1Bit 0 is ignored unless it is at begining of line. Bits 1, 2, 3, 6, 7 are not used.

2Standard and compressed pitch cannot be used together in the same line. 3Cannot be used together with normal height in same line.

74 May 1996