M-S Cash Drawer 7193 manual Set or Cancel Rotated Characters Clockwise

7193 Owner’s Guide Commands

Set or Cancel Rotated Characters Clockwise

Rotates characters 90 degrees clockwise. It remains in effect until the printer is reset or until a Clear Printer (10) or Rotated Print (1B 12) command is received. It is valid only at the beginning of a line. It cannot be used with non-rotated print on the same line. See “Summary of Rotated Printing” on the next page.

Hex	Decimal	ASCII	Value of n		Default
1B 56 n	27 86 n	ESC V n	0	= Cancel	0
			1	= Set

Set or Cancel Upside-Down Characters

Prints upside-down characters. It is valid only at the beginning of a line. The character order is inverted in the buffer so text is readable. It cannot be used with right-side up characters on the same line. The Rotated Print (1B 12) command cancels this command. Only bit 0 is used. Bits 1-7 are not used. See “Summary of Rotated Printing” on the next page.

Hex	Decimal	ASCII	Value of n		Default
1B 7B n	27 123 n	ESC { n	0	= Cancel	0
			1	= Set

May 1996