ParkerVision WR1500 quick start Ascii

Page 12

®

13

WR1500 4-Port Wireless DSL/Cable Router

 

wireless network.

 

To have the WR1500 Wireless Router automatically

 

select a channel, click Scan instead.

Scan

Click this button to have the WR1500 Wireless

 

Router automatically scan for and select a channel

 

with the least interference.

WEP

Select Disable allows all wireless computers to

Encryption

communicate with the Wireless Routers without

 

any data encryption.

 

Select 64-bit WEP or 128-bit WEP to allow data

 

encryption.

ASCII

Select this option in order to enter ASCII characters

HEX

as the WEP keys.

Select this option to enter hexadecimal characters

as the WEP keys. The preceding “Ox” is entered automatically. Leave this in front of our key.

Key 1 to Key 4 used to encrypt data. Both the WR1500 Wireless Router and the wireless stations must use the same WEP key for data transmission.

If you chose 64-bit WEP, then enter any 5 ASCII

Continued next page

Image 12
Contents Guide Package Contents Installation Next Changing the IP Address Make the connections as described below Rear panel of the WR1500 contains several ports, as shownEstablishing Contact on Your Computer with the WR1500 Again You should now see the Main Menu screen, as shown below Label Description Wizard Setup Wireless LAN Setup Set up your wireless LAN using the wizard screen belowAscii Select from Standard, RR-Toshiba Minutes from 1 to 59 30 recommended for Pptp Encapsulation PptpPptp Configuration PPPoE Encapsulation Wizard Wizard Setup WAN and DNS WAN IP Address AssignmentIP Address and Subnet Mask DNS Server Address Assignment WAN MAC AddressWizard WR1500 4-Port Wireless DSL/Cable Router Basic Setup of Your WR1500 is Now Complete Saving and Restoring Your ConfigurationProcedure to Use the Reset Button Problem Corrective Action Problems with the Ethernet Interface Troubleshooting the Ethernet InterfaceWR1500 4-Port Wireless DSL/Cable Router Internet Access chapter SMT