ParkerVision WR1500 quick start Internet Access chapter SMT

Page 29

®

30

WR1500 4-Port Wireless DSL/Cable Router

 

appropriate cable.

 

Check with the manufacturer of your cable/

 

DSL device about your cable requirement

 

because for some devices may require

 

a crossover cable and others a straight-

 

through Ethernet cable.

 

Verify your WAN settings. Refer to the WAN

 

chapter (Web Confi guration Utility) or the

 

Internet Access chapter (SMT).

 

Make sure you entered the correct user

 

name and password.

 

For wireless stations, check that both the

 

WR1500 Wireless Router and wireless

 

station(s) are using the same ESSID,

 

channel and WEP keys (if WEP encryption

 

is activated).

Internet connection

If you use PPTP or PPPoE encapsulation,

disconnects

check the idle time-out setting. Refer to the

 

WAN chapter (Web Confi guration Utility)

 

or the Remote Node Confi guration chapter

Image 29
Contents Guide Package Contents Installation Next Changing the IP Address Rear panel of the WR1500 contains several ports, as shown Make the connections as described belowEstablishing Contact on Your Computer with the WR1500 Again You should now see the Main Menu screen, as shown below Label Description Set up your wireless LAN using the wizard screen below Wizard Setup Wireless LAN SetupAscii Select from Standard, RR-Toshiba Minutes from 1 to 59 30 recommended for Pptp Pptp EncapsulationPptp Configuration PPPoE Encapsulation Wizard WAN IP Address Assignment Wizard Setup WAN and DNSIP Address and Subnet Mask WAN MAC Address DNS Server Address AssignmentWizard WR1500 4-Port Wireless DSL/Cable Router Saving and Restoring Your Configuration Basic Setup of Your WR1500 is Now CompleteProcedure to Use the Reset Button Problem Corrective Action Troubleshooting the Ethernet Interface Problems with the Ethernet InterfaceWR1500 4-Port Wireless DSL/Cable Router Internet Access chapter SMT