ParkerVision WR1500 quick start You should now see the Main Menu screen, as shown below

Page 9

®

10

WR1500 4-Port Wireless DSL/Cable Router

Establishing Contact on Your Computer with the WR1500 - Continued

Step 3.7 You should now see the MAIN MENU screen, as shown below.

Note - The WR1500 Wireless Router automatically times out after

ﬁve minutes of inactivity. Simply log back into the WR1500 Wireless Router if this happens to you.

Note - If you forget your password or cannot access the WR1500, you will need to reset the unit. Refer to the section on resetting the unit in the appendix of this quick start guide.

Image 9

Contents Guide Package Contents Installation Next Changing the IP Address Rear panel of the WR1500 contains several ports, as shown Make the connections as described belowEstablishing Contact on Your Computer with the WR1500 Again You should now see the Main Menu screen, as shown below Label Description Set up your wireless LAN using the wizard screen below Wizard Setup Wireless LAN SetupAscii Select from Standard, RR-Toshiba Minutes from 1 to 59 30 recommended for Pptp Pptp EncapsulationPptp Conﬁguration PPPoE Encapsulation Wizard WAN IP Address Assignment Wizard Setup WAN and DNSIP Address and Subnet Mask WAN MAC Address DNS Server Address AssignmentWizard WR1500 4-Port Wireless DSL/Cable Router Saving and Restoring Your Configuration Basic Setup of Your WR1500 is Now CompleteProcedure to Use the Reset Button Problem Corrective Action Troubleshooting the Ethernet Interface Problems with the Ethernet InterfaceWR1500 4-Port Wireless DSL/Cable Router Internet Access chapter SMT