ParkerVision WR1500 quick start Wizard

Page 18

®

19

WR1500 4-Port Wireless DSL/Cable Router

WIZARD

ISP Parameters for Internet Access

Encapsulation	PPP over Ethernet
Service Name
User Name
Password
Nailed-Up Connection
Idle Timeout	100	(In Seconds)
		Back	Next

The following table describes the labels in the above screen.

LABELDESCRIPTION

ISP Parameter for Internet Access

Encapsulation Choose an encapsulation method from the pull-down list box. PPPoE forms a dial-up connection.

Service Name	Type the name of your service provider.
User Name	Type the user name given to you by your ISP.
Password	Type the password associated with the user name
	above.

Image 18

Contents Guide Package Contents Installation Next Changing the IP Address Make the connections as described below Rear panel of the WR1500 contains several ports, as shownEstablishing Contact on Your Computer with the WR1500 Again You should now see the Main Menu screen, as shown below Label Description Wizard Setup Wireless LAN Setup Set up your wireless LAN using the wizard screen belowAscii Select from Standard, RR-Toshiba Minutes from 1 to 59 30 recommended for Pptp Encapsulation PptpPptp Conﬁguration PPPoE Encapsulation Wizard Wizard Setup WAN and DNS WAN IP Address AssignmentIP Address and Subnet Mask DNS Server Address Assignment WAN MAC AddressWizard WR1500 4-Port Wireless DSL/Cable Router Basic Setup of Your WR1500 is Now Complete Saving and Restoring Your ConfigurationProcedure to Use the Reset Button Problem Corrective Action Problems with the Ethernet Interface Troubleshooting the Ethernet InterfaceWR1500 4-Port Wireless DSL/Cable Router Internet Access chapter SMT