ParkerVision WR1500 quick start Select from Standard, RR-Toshiba

Page 13

®

14

WR1500 4-Port Wireless DSL/Cable Router

WIZARD

ISP Parameters for Internet Access

Encapsulation	Ethernet
Service Type	RR-Toshiba
User Name
Password	0.0.0.0
Login Server IP Address	0.0.0.0

Back Next

The following table describes the labels in the above screen.

LABEL	DESCRIPTION
ISP Parameters for Internet Access
Encapsulation	You must choose the Ethernet option
	when the WAN port is used as a regular
	Ethernet. Otherwise, choose PPPoE or
	PPTP for a dial-up connection. PPTP
	is typically used outside of the United
	States.
Service Type	Select from Standard, RR-Toshiba

Continued next page

Image 13

Contents Guide Package Contents Installation Next Changing the IP Address Rear panel of the WR1500 contains several ports, as shown Make the connections as described belowEstablishing Contact on Your Computer with the WR1500 Again You should now see the Main Menu screen, as shown below Label Description Set up your wireless LAN using the wizard screen below Wizard Setup Wireless LAN SetupAscii Select from Standard, RR-Toshiba Minutes from 1 to 59 30 recommended for Pptp Pptp EncapsulationPptp Conﬁguration PPPoE Encapsulation Wizard WAN IP Address Assignment Wizard Setup WAN and DNSIP Address and Subnet Mask WAN MAC Address DNS Server Address AssignmentWizard WR1500 4-Port Wireless DSL/Cable Router Saving and Restoring Your Configuration Basic Setup of Your WR1500 is Now CompleteProcedure to Use the Reset Button Problem Corrective Action Troubleshooting the Ethernet Interface Problems with the Ethernet InterfaceWR1500 4-Port Wireless DSL/Cable Router Internet Access chapter SMT